Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HIS-RN Internally threaded sleeve
Anchor size: M8-M20
Anchor length: 90mm-205mm
Material composition: Stainless steel A4-70
Head configuration: Inner thread
Base materials: Concrete (uncracked)
PROFIS software: Yes
Approvals / test reports: ETA, Fire
Type of fastening: Pre-fastening
HIS-RN A4 Stainless-Steel Sleeve – flush, removable insert for HVU capsules and HIT mortars in corrosive zones.
Parameter | Specification | Notes |
Size | M8–M20 | ISO inner thread |
Length | 90–205 mm | matches embedment |
Material | A4-70 stainless steel (1.4401) | EN 10088-1 |
Base material | Uncracked concrete | ETA-validated |
Service temp | –40 °C – +120 °C | continuous |
Max torque | 10 Nm (M8) – 150 Nm (M20) | per ETA table |
3.Performance Data
Mechanical Properties
Size | fuk (N/mm²) | fyk (N/mm²) | As (mm²) | NRd* (kN) | VRd* (kN) |
M8 | 700 | 450 | 51.5 | 8.7 | 6.3 |
M12 | 700 | 450 | 169 | 20.1 | 14.5 |
M16 | 700 | 450 | 256 | 32.7 | 26.9 |
M20 | 700 | 450 | 238 | 51.9 | 42.0 |
Values for uncracked C20/25, embedment per setting table.
100 % load retention after 1 000 h salt-spray (ASTM B117)
Fire rating: R120 (EN 13501 & ASTM E119)
Fatigue-tested 2 million cycles with HIT-HY 200-A/-R V3
Step | Action | Tools/Requirements |
1 | Drill hole to h₀ | Rotary hammer |
2 | Clean hole | Blow-out pump |
3 | Drop HVU capsule | HIS-S setting tool |
4 | Drive sleeve | Hammer & tool |
5 | Wait cure | Check cure chart |
6 | Tighten bolt | Torque wrench |
Application | Recommended Spec | Conditions |
Steel column base | M20 × 205 mm | uncracked C30/37 |
Façade bracket | M16 × 170 mm | coastal salt spray |
Machinery rail | M12 × 125 mm | heavy industrial air |
Temporary anchor | M10 × 110 mm | reusable bolt |
6.Certification & Compliance
Send Message
