Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HUS4-MAX Hybrid Screw Anchor Capsule
Anchor size: 10-16mm
Pack size: 32pc/50pc
Base materials: Concrete (uncracked)
PROFIS software: Yes
1. Product Overview – HUS4-MAX Hybrid Screw Anchor Capsule
HUS4-MAX Hybrid Screw Anchor Capsule slashes installation time while delivering chemical-anchor strength.
(1) 4× faster than injectable mortars
(2) No cleaning, no curing, immediate loading
(3) Smaller drill bit and shallower embedment
(4) ETA seismic C2 & adjustability approvals
2. HUS4-MAX Hybrid Screw Anchor Capsule Technical Parameters
Parameter | Specification | Notes |
Anchor size | 10 / 12 / 14 / 16 mm | M-thread |
Pack size | 32 pc / 50 pc | Capsule count |
Base material | Uncracked concrete | C20/25–C50/60 |
Temperature range | –40 °C to +120 °C | Long-term +72 °C |
Embedment depth | 60–96 mm | Size-dependent minimum |
3. HUS4-MAX Hybrid Screw Anchor Capsule Performance Data
Size | Min embedment | Tension Nrd* | Shear Vrd* |
10 | 60 mm | 12.5 kN | 15.0 kN |
12 | 72 mm | 18.0 kN | 22.0 kN |
14 | 84 mm | 25.0 kN | 30.0 kN |
16 | 96 mm | 32.0 kN | 38.0 kN |
*Design values C20/25, uncracked, no edge effect
30 % shallower embedment vs. resin anchors
Immediate full load—zero curing wait
Smaller edge distance saves reinforcement clashes
4.HUS4-MAX Hybrid Screw Anchor Capsule Installation Guide
Step | Action | Tools/Requirements |
1 | Mark hole | Marker |
2 | Drill to depth | Rotary hammer |
3 | Blow once | Hand blower |
4 | Insert capsule | Push fully |
5 | Drive HUS4 | Impact driver |
6 | Tighten & load | Immediate use |
5. HUS4-MAX Hybrid Screw Anchor Capsule Application Scenarios
Application | Recommended Spec | Conditions |
Structural baseplates | 12 × 72 mm | C25/30 uncracked |
Stair stringers | 16 × 96 mm | Seismic C2, fire R120 |
Machine platforms | 14 × 84 mm | –20 °C freezer floor |
Balcony brackets | 10 × 60 mm | Edge 100 mm, outdoor |
6. HUS4-MAX Hybrid Screw Anchor Capsule Certifications & Compliance
(1) ETA-21/0740 – cracked & uncracked concrete C20/25–C50/60
(2) ETA seismic C1 & C2 per EN 1992-4
(3) Fire classification R60/R120 (ISO 834 curve)
(4) CE-marking – EN 1992-4:2018 & EN 14592
Send Message
