Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HUS4-H anchor
Anchor size: 8 mm/10 mm/12 mm/14 mm/16 mm
Anchor length: 45 mm-305 mm
Pack size: 16 pc/25 pc/50 pc
High-performing hexagonal head screw anchor for fastening to concrete and masonry (carbon steel)
Material, corrosion: Carbon steel, zinc-plated
Head configuration: Hex head
Approvals / test reports: ETA, Fire, Seismic
Material, corrosion: Carbon steel, zinc-plated
Head configuration:Hex head
Approvals / test reports:ETA, Fire, Seismic
1. HUS4-H anchor Product Overview
HUS4-H anchor by Hilti– High-performance anchoring system designed for maximum productivity and reduced installation time.
High productivity with less drilling and fewer operations than conventional anchors
Suitable for a wide range of base materials including concrete and masonry
Fast curing and high load-bearing capacity
Free of styrene for improved environmental and user safety
2. HUS4-H anchor Technical Specifications
Parameter | Specification | Notes |
Thread Size Range | M6–M16 | Wide range of applications |
Anchor Depth | 60–150 mm | Depends on anchor size |
Tensile Strength | ≥ 20 kN | In concrete C20/25 |
Shear Strength | ≥ 12 kN | Standard conditions |
Temperature Range | -30°C to +70°C | In-service conditions |
Fire Resistance | Up to 90 minutes | Certified evaluation |
3. HUS4-H anchor HUS4-H screw anchor Performance Data
Size | Min. Embedment Depth (mm) | Ultimate Tensile Load (kN) |
M8 | 70 | 22.0 |
M10 | 85 | 28.5 |
M12 | 100 | 35.0 |
M16 | 150 | 50.0 |
Reduces drilling time and operations compared to conventional anchors
Excellent performance in both static and dynamic loading conditions
Environmentally friendly formulation, free of styrene
4. HUS4-H anchor Installation Guide
Step | Action | Tools/Requirements |
1 | Drill hole to specified depth | Rotary hammer drill |
2 | Clean hole thoroughly | Brush and air pump |
3 | Inject cartridge material | Dispensing tool |
4 | Insert anchor and rotate | Manual torque wrench |
5 | Allow full curing time | Avoid load during setting |
5. HUS4-H anchor Application Scenarios
Application | Recommended Spec | Conditions |
Structural connections | M12–M16 | High load, static |
Facade systems | M10–M12 | Wind load, dynamic |
Industrial machinery | M12–M16 | Vibratory conditions |
Concrete repairs | M8–M10 | Cracked concrete |
6. Certifications & Compliance
(1) European Technical Assessment (ETA)
(2) ISO 17025 tested and certified
(3) ICC-ES Evaluation Report for US applications
(4) Fire Resistance tested per EN 13501-2
(5) Complies with seismic standards AC156
Send Message
