HUS4-H anchor China Sourcing Partner

Hilti Fastener: HUS4-H anchor China Sourcing Partner

Product name: HUS4-H anchor China Sourcing Partner
Anchor size: 8 mm/10 mm/12 mm/14 mm/16 mm
Anchor length: 45 mm-305 mm
Pack size: 16 pc/25 pc/50 pc
High-performing hexagonal head screw anchor for fastening to concrete and masonry (carbon steel)
Material, corrosion: Carbon steel, zinc-plated
Head configuration: Hex head
Approvals / test reports: ETA, Fire, Seismic
Material, corrosion: Carbon steel, zinc-plated
Head configuration:Hex head
Approvals / test reports:ETA, Fire, Seismic
Price: USD 3.99 - 9.99/ Set
MOQ: 10 Set
Customization: yes
Delivery time: 7-30 Day

Quantity

Contact Now

add to cart

Download directory

1. HUS4-H anchor Product Overview
HUS4-H anchor by Hilti– High-performance anchoring system designed for maximum productivity and reduced installation time.

High productivity with less drilling and fewer operations than conventional anchors

Suitable for a wide range of base materials including concrete and masonry

Fast curing and high load-bearing capacity

Free of styrene for improved environmental and user safety

2. HUS4-H anchor Technical Specifications

Parameter	Specification	Notes
Thread Size Range	M6–M16	Wide range of applications
Anchor Depth	60–150 mm	Depends on anchor size
Tensile Strength	≥ 20 kN	In concrete C20/25
Shear Strength	≥ 12 kN	Standard conditions
Temperature Range	-30°C to +70°C	In-service conditions
Fire Resistance	Up to 90 minutes	Certified evaluation

3. HUS4-H anchor HUS4-H screw anchor Performance Data

Size	Min. Embedment Depth (mm)	Ultimate Tensile Load (kN)
M8	70	22.0
M10	85	28.5
M12	100	35.0
M16	150	50.0

Reduces drilling time and operations compared to conventional anchors

Excellent performance in both static and dynamic loading conditions

Environmentally friendly formulation, free of styrene

4. HUS4-H anchor Installation Guide

Step	Action	Tools/Requirements
1	Drill hole to specified depth	Rotary hammer drill
2	Clean hole thoroughly	Brush and air pump
3	Inject cartridge material	Dispensing tool
4	Insert anchor and rotate	Manual torque wrench
5	Allow full curing time	Avoid load during setting

5. HUS4-H anchor Application Scenarios

Application	Recommended Spec	Conditions
Structural connections	M12–M16	High load, static
Facade systems	M10–M12	Wind load, dynamic
Industrial machinery	M12–M16	Vibratory conditions
Concrete repairs	M8–M10	Cracked concrete

6. Certifications & Compliance

(1) European Technical Assessment (ETA)

(2) ISO 17025 tested and certified

(3) ICC-ES Evaluation Report for US applications

(4) Fire Resistance tested per EN 13501-2

(5) Complies with seismic standards AC156

FAQ

1. What is the difference between HUS4-H and HUS4-C anchors?
HUS4-H is a chemical/injection anchor (styrene-free) for concrete & masonry. HUS4-C is a mechanical screw anchor for cracked concrete. HUS4-H handles higher loads (up to 50 kN).

2. What base materials is HUS4-H suitable for?
Concrete (cracked & non-cracked) and masonry. Wide material compatibility.

3. What is the curing time before loading?
Depends on temperature – typically 20–90 minutes at 20°C. Check cartridge technical data for exact time.

4. Is HUS4-H fire-rated?
Yes – up to R90 (90 minutes) per EN 13501-2.

5. Does HUS4-H require hole cleaning?
Yes. Brush + air pump required – proper cleaning is critical for performance.

Download directory

Send Message