HUS4-C Screw Anchor China Supplier

Hilti Fastener: HUS4-C Screw Anchor China Supplier

Product Name: HUS4-C Screw Anchor China Supplier
Anchor size: 8mm/10mm
Anchor length: 55-175mm
Material composition: Steel, zinc-plated (min. 5 µm)
Head configuration: Countersunk Torx
Approvals / test reports: ETA, Fire, Seismic
PROFIS software: Yes
Price: USD 4.99 - 9.99/ Set
MOQ: 10 Sets
Customization: yes
Delivery time: 7-30 Day

Quantity

Contact Now

add to cart

1. HUS4-C Screw Anchor Product Overview

HUS4-C Screw Anchor Hilti: countersunk removable fastener for flush-finish baseplates in cracked concrete

HUS4-C Screw Anchor – the flush-mount, reusable Hilti fastener that levels baseplates with zero cleaning and a perfect countersunk finish.

(1) Reusable & adjustable ≥ 60 mm embedment

(2) Countersunk Torx head sits flush—no protrusion

(3) Zinc-plated ≥ 5 µm, indoor & temporary outdoor use

(4) PROFIS design cuts material cost 10 %

2. HUS4-C Screw Anchor Technical Parameters

Parameter	Specification	Notes
Size	8 / 10 mm	Thread diameter
Length	55–175 mm	L min / max
Head	Countersunk Torx T30	Flush finish
Coating	Zinc ≥ 5 µm	Indoor corrosion class
Embedment	≥ 60 mm	For adjustability
Service temp	–30 °C to +50 °C	Dry conditions

3. HUS4-C Screw Anchor Performance Data

Size	h nom (mm)	Tension N Rd (kN)	Shear V Rd (kN)
8	60	5.4	6.2
10	80	8.5	9.9

20 % higher load than standard zinc screws

Flush head eliminates trip hazards

Smaller edge distance saves concrete edge

ETA seismic C2 keeps safety under M7.5 quakes

4. HUS4-C Screw AnchorInstallation Guide

Step	Action	Tools/Requirements
1	Drill hole to h nom	Rotary hammer
2	Blow dust once	Hand pump
3	Insert HUS4-C Screw Anchor	Manual push
4	Level baseplate	Torx T30 bit
5	Tighten flush	Standard driver

5. HUS4-C Screw AnchorApplications

Application	Recommended Spec	Conditions
Staircase handrails	M10 × 80 mm	Cracked C25/30
Balustrade posts	M8 × 60 mm	Indoor dry
Temporary fencing	M10 × 100 mm	Outdoor short-term
Metal trim plates	M8 × 55 mm	Flush finish required

6.HUS4-C Screw Anchor Certification & Compliance

(1) ETA-19/0598 – cracked & non-cracked concrete C20/25–C50/60

(2) ETA seismic C1 & C2 – PGA 0.30 g, EN 1992-4

(3) Fire rating R30–R90 – EN 1992-1-2, dry indoor

(4) CE mark – European Conformity

FAQ

1. Can HUS4-C be reused and adjusted?
Yes. Reusable and adjustable when embedment ≥ 60 mm. Fully unscrew for removal, inspect threads, and reuse in a new hole. Ideal for baseplate leveling.

2. Does installation require hole cleaning?
No. Self-tapping design cuts threads into concrete. Standard process: drill + screw in. No compressed air or brush needed. Tools: rotary hammer, Torx T30 bit.

3. Is it approved for cracked concrete?
Yes. ETA-certified for cracked & non-cracked concrete (C20/25–C50/60). Also seismic C1/C2 rated and fire-rated R30–R90 (dry indoor).

4. What load capacity and size should I choose?
- M8: tension ~5.4–8.5 kN, shear ~6.2–9.9 kN
- M10: tension ~8.5–15.8 kN, shear ~9.9–15.9 kN
Quick guide: handrails → M10×80; interior trims → M8×55/60; temporary fencing → M10×100. Use PROFIS software for precise design.

5. What if I hit rebar? Can it be reused?
Stop drilling – do not force through. Relocate anchor or use a rebar scanner (e.g., Hilti PS 50/85) to avoid bars.
Reuse: allowed in a new hole if threads are undamaged.

Send Message