Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HUS3-PS 6 SCREW ANCHOR
Anchor size: 6mm
Anchor length: 40mm/60mm
Material, Corrosion: Carbon steel, galvanized
Head Configuration: Pan
Certifications/Test Reports: ETA, VDS, Fire
Substrates: Concrete (Hollow), Concrete (Cracked), Concrete (Non-Cracked), Masonry (Solid)
Reusability (Removable): Not possible
PROFIS Software: Yes
Material Composition: Steel, galvanized (minimum 5 µm)
Quality Inspection: Passed
1. HUS3-PS 6 SCREW ANCHOR
Hilti’s pan-head screw for fast M8/M10 pipe hangers in concrete & masonry.
ETA cracked concrete & Seismic C1/C2
Galvanized 5 µm carbon steel, 40/60 mm lengths
Pan head sits flush—no protrusion
Drill, drive, done—zero cure time
2. HUS3-PS 6 SCREW ANCHOR TECHNICAL PARAMETER
Parameter | Specification | Notes |
Diameter | 6 mm | Constant along shank |
Length | 40 / 60 mm | Two stock sizes |
Head | Pan head with M8 & M10 internal thread | Direct rod attachment |
Coating | Galvanized ≥ 5 µm | Indoor/mild outdoor |
Temp. range | –30 °C to +80 °C | Service limits |
Max torque | 25 Nm | Hilti calibrated tool |
3. HUS3-PS 6 SCREW ANCHOR PERFORMANCE DATA
Size | Embed. depth | N*cracked kN | V*cracked kN | N*masonry kN |
6×40 | 30 mm | 4.8 | 5.2 | 3.5 |
6×60 | 50 mm | 7.2 | 7.8 | 5.0 |
No hole-cleaning or adhesive waiting
Immediate full load—boosts productivity 50 %
Uniform outer diameter—reduces splitting risk
PROFIS design software gives exact spacing & edge distances
4. HUS3-PS 6 SCREW ANCHOR INSTALLATION GUIDE
Step | Action | Tools/Requirements |
1 | Mark spot | Marker |
2 | Hammer-drill 6 mm hole | SDS-plus bit |
3 | Blow once | Hand pump |
4 | Hammer anchor in | Hand or rubber mallet |
5 | Torque 25 Nm | Torque wrench |
6 | Thread M8/M10 rod | Ready for hanger |
5. HUS3-PS 6 SCREW ANCHOR TYPICAL APPLICATIONS
Application | Recommended Spec | Conditions |
Sprinkler pipe drops | 6×40 mm, M8 rod | Cracked slab |
HVAC duct trapeze | 6×60 mm, M10 rod | Hollow-core plank |
Cable ladder fix | 6×60 mm, M10 rod | Solid masonry wall |
Single ventilation stack | 6×40 mm, M8 rod | Non-cracked beam |
6. CERTIFICATION & COMPLIANCE
ETA-19/0593 – cracked & un-cracked concrete
ETA Seismic C1 & C2 – 0.40 g test spectra
VDS approval – pipe hanger safety verified
Fire resistance R 120 (6×60 mm) – 90 min load retention
CE mark per EN 1992-4:2018 – EU & UKCA conformity
Send Message
