Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HUS3-PL 6 SCREW ANCHOR
Anchor size: 6 mm
Anchor length: 60mm
Material composition: Steel, zinc-plated (min. 5 µm)
Head configuration: Pan head
PROFIS software: Yes
Bit Size: T30
HUS3-PL 6 SCREW ANCHOR
HUS3-PL 6 SCREW ANCHOR
Hilti’s low-profile zinc-plated screw for fast, removable channel & railing fixations.
Flat pan head flush with channel feet
T30 bit drives 60 mm anchor in seconds
Low expansion—safe near edges
Removable—reuse channel without new holes
2. HUS3-PL 6 SCREW ANCHOR TECHNICAL PARAMETERS
Parameter | Specification | Notes |
Diameter | 6 mm | Uniform shank |
Length | 60 mm | Single stock size |
Head | Pan head, 14 mm OD | Flush with channel |
Coating | Zinc-plated ≥ 5 µm | Indoor / semi-outdoor |
Drive | T30 Torx | Bit included in box |
Temp. range | –30 °C to +80 °C | Service limits |
3. HUS3-PL 6 SCREW ANCHOR PERFORMANCE DATA
Embed. depth | Tensile N kN | Shear V kN | Edge dist. mm |
50 mm | 7.0 | 7.5 | 60 |
40 mm | 5.5 | 6.0 | 50 |
Low expansion forces—reduced edge blow-out risk
Through-fixture drilling—no hole cleaning
Immediate load—zero waiting time
PROFIS calculates exact spacing & edge distances
4. HUS3-PL 6 SCREW ANCHOR INSTALLATION GUIDE
Step | Action | Tools/Requirements |
1 | Mark channel hole | Marker |
2 | Drill 6 mm thru | Hammer drill |
3 | Blow dust out | Hand pump |
4 | Drive anchor flush | Impact driver |
5 | Tighten to 20 Nm | Torque wrench |
6 | Reverse for removal | T30 bit |
5. HUS3-PL 6 SCREW ANCHOR TYPICAL APPLICATIONS
Application | Recommended Spec | Conditions |
Ceiling channel for HVAC | 60 mm anchor | Uncracked slab |
Handrail base plate | 60 mm anchor | Cracked stair |
Ornamental steel bracket | 60 mm anchor | Solid masonry |
Removable pipe support | 60 mm anchor | Hollow-core plank |
6. CERTIFICATION & COMPLIANCE
ETA-19/0593 – cracked & un-cracked concrete
CE mark per EN 1992-4:2018 – EU & UKCA
Fire resistance R 90 – 60 mm embedment
Corrosion class C3 – zinc ≥ 5 µm
Removability tested – 5 cycles without thread damage
Send Message
