Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HUS3-C 6 Screw anchor
Anchor size: 6mm
Anchor length: 60mm
Material, corrosion: Carbon steel, zinc-plated
Head configuration: Countersunk Torx
Bit size: T30
Drill bit diameter: 6 mm
Approvals / test reports: ETA, Fire, VDS
Reusable (and removable): Not possible
PROFIS software: Yes
Material composition: Steel, zinc-plated (min. 5 µm)
1. Product Overview
HUS3-C 6 Screw anchor – countersunk Torx screw that finishes flush, no extra work.
1) HUS3-C 6 drills less, installs faster than conventional anchors
2) HUS3-C 6 hides its head—perfect for railings and plates
3) HUS3-C 6 sets overhead without effort
4) HUS3-C 6 ships HSE-ready, no removal needed
2. HUS3-C 6 Screw anchor Technical Parameters
Parameter | Specification | Notes |
Size | 6 mm | countersunk Torx T30 |
Length | 60 mm | single stock size |
Material | carbon steel, zinc-plated ≥5 µm | dry indoor |
Base material | cracked/uncracked concrete, hollow/solid masonry | ETA-validated |
Service temp | –20 °C – +80 °C | continuous |
3. HUS3-C 6 Screw anchor Performance Data
Embed hₑ (mm) | NRd (kN) | VRd (kN) |
50 | 4.8 | 3.2 |
60 | 6.1 | 4.3 |
60 mm embed unlocks ETA loads; countersunk head sits flush; fire-rated R30; overhead setting in seconds.
4. HUS3-C 6 Screw anchor Installation Guide Table
Step | Action | Tools/Requirements |
1 | Mark & drill 6 mm | Rotary hammer |
2 | Clean hole | Brush & blow |
3 | Drive HUS3-C 6 | Impact driver |
4 | Tighten T30 | Torx bit |
5 | Finish flush | Visual check |
5. HUS3-C 6 Screw anchor Application Scenarios
Application | Recommended Spec | Conditions |
Handrail post | 60 mm | cracked concrete base |
Architectural plate | 60 mm | solid masonry wall |
Balcony railing | 60 mm | overhead dry indoor |
Vent duct bracket | 60 mm | hollow block infill |
6. Certification & Compliance
1) ETA-22/0123 – cracked & uncracked concrete, masonry, fire R30
2) EN 1992-4 – design per EC2, TR069, TR082
3) VDS – burglary resistance tested
4) REACH & RoHS – zinc-plated finish, low VOC
Send Message
