Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HST2-R Wedge Anchor
Anchor size：M8 to M16
Anchor length：75 mm to 170 mm
Pack size：12 pc to 50 pc
High-performance wedge anchor for everyday static loads in cracked concrete (A4 stainless steel)
(1)Material, corrosion: Stainless steel, A4
(2)Head configuration: Externally threaded
(3)Approvals / test reports: ETA, Fire
Material, corrosion: Stainless steel, A4
Head configuration: Externally threaded
Approvals / test reports: ETA, Fire
Base materials: Concrete (cracked), Concrete (uncracked)
Installation tools: SIW 4AT-22 ½” Cordless impact wrench, DD 30-W Core drill
PROFIS software: Yes
Environmental conditions: Indoor with temporary condensation
1. Product Overview
HST2-R Wedge Anchor – A reliable, everyday expansion anchor system for standard applications in cracked and non-cracked concrete.
(1)Features optimized expansion cone and wedge design
(2)Provides consistent performance in cracked concrete conditions
(3)Includes product and length identification for quality control
(4)Utilizes special steel and coatings for enhanced durability
2. HST2-R Wedge Anchor Technical Specifications
Parameter | Specification | Notes |
Anchor Type | Expansion anchor | Mechanical fixing system |
Concrete suitability | Cracked & non-cracked | C20/25 to C50/60 |
Material Quality | Special steel | With protective coatings |
Size Range | M8-M20 | Various applications |
Temperature Range | -40°C to +80°C | In-service conditions |
3. HST2-R Wedge Anchor Performance Advantages:
(1)Reliable load values in both cracked and non-cracked concrete
(2)Consistent expansion mechanism for secure anchoring
(3)Good resistance to vibration and dynamic loads
(4)Long-term durability in various environmental condition
4. HST2-R Wedge anchor Application Scenarios
Application | Recommended Spec | Conditions |
General construction anchoring | HST2-R M8-M12 | Cracked concrete |
Mechanical equipment fixing | HST2-R M10-M16 | Indoor environments |
Electrical cabinet installation | HST2-R M8-M12 | Static loads |
Building services support | HST2-R M10-M16 | Moderate dynamic loads |
5. Certifications & Compliance
(1)European Technical Assessment (ETA) approved
(2)Compliance with EN 1992-4 design standard
(3)Suitable for use in cracked concrete conditions
(4)Quality management system ISO 9001 certified
Features:
(1)The optimised design of the expansion cone and wedge combined with special steel and coatings ensure appropriate performance in cracked and uncracked concrete
(2)Suitable for installation with SIW 6AT-A22 and SI-AT-A22 module for higher productivity and safety
(3)Automatic hole cleaning with hollow drill bits in combination with Hilti vacuum cleaners
(4)Suitable for use in hammer-drilled and diamond-cored holes (DD EC-1 and DD-30W)
Applications:
(1)Wide range of safety-relevant applications
(2)Particularly suited to safety-relevant applications in corrosive environments
(3)Facades
(4)Hand rails
Send Message
