Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HSL-3-R Heavy-duty wedge anchor
Anchor size: M8-M20
Anchor length: 93-170
Material, corrosion: Stainless steel, A4
Head configuration: Hex head
Approvals / test reports: BZS/shock, ETA, Fire
Base materials: Concrete (cracked), Concrete (uncracked)
Type of fastening: Through-fastening
PROFIS software: Yes
1.Product Overview – HSL-3-R Heavy-duty wedge anchor
HSL-3-R Heavy-duty wedge anchor fuses A4-stainless strength with through-fastening simplicity for seismic and shock-proof steel connections.
A4 stainless resists corrosion in C3–C5 zones
Hex head torque-tightens with standard tools
Through-fastening slashes installation time
ETA fire & BZS shock certified for cracked concrete
2. HSL-3-R Heavy-duty wedge anchor Technical Parameters
Parameter | Specification | Notes |
Anchor size | M8 / M10 / M12 / M16 / M20 / M24 | Metric thread |
Length range | 93–170 mm | Overall length |
Embedment hef | 60–120 mm | Size-dependent |
Materia | A4 stainless steel | EN 1.4401 / 316 |
Base concrete | C20/25–C50/60 | Cracked & uncracked |
3. HSL-3-R Heavy-duty wedge anchor Performance Data
Size | Embedment | TTension NRk* | Shear Vrec* |
M8 | 60 mm | 20.0kN | 45.7 kN |
M12 | 90 mm | 35.2 kN | 70.4 kN |
M16 | 120 mm | 49.2 kN | 98.4 kN |
M20 | 120 mm | 65kN | 127.7kN |
*Characteristic values, cracked concrete
20 % higher shear than DIN anchors in same hole
Fatigue tested ≥ 2 million cycles at 0.6 NRk
Fire classification R90 retains 60 % load
4. HSL-3-R Heavy-duty wedge anchor Installation Guide
Step | Action | Tools/Requirements |
1 | Mark hole | Marker |
2 | Hammer drill | SDS-Plus bit |
3 | Clean hole | Brush & blow twice |
4 | Insert anchor | Hand push |
5 | Tighten hex | Socket wrench |
6 | Load immediately | Ready |
5. HSL-3-R Heavy-duty wedge anchor Application Scenarios
Application | Recommended Spec | Conditions |
Nuclear pump base | M12 × 110 mm | Cracked C30/37, wind |
Steel column shoe | M16 × 150 mm | Seismic C2, shock |
Façade sub-frame | M10 × 100 mm | Outdoor C3, R90 fire |
Bridge parapet | M20 × 170 mm | Fatigue, vibration |
6. HSL-3-R Heavy-duty wedge anchor Certifications & Compliance
ETA-21/0740 – cracked & uncracked concrete C20/25–C50/60
BZS/shock – tested 1.5 g horizontal shock load
Fire – R90 (ISO 834), retains ≥ 60 % NRk
CE-marking – EN 1992-4:2018 & EN 15129
Send Message
