Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HSA Wedge anchor
Anchor size: M6/M8/M10/M12/M16/M20
Anchor length:50 mm-232 mm
Pack size:10 pc/16 pc/25 pc/40 pc/50 pc/80 pc/100 pc/200 pc
1. Product Overview
HSA Wedge anchor – Your everyday standard expansion anchor for uncracked concrete.
Fast and convenient setting behavior
High load capacity with minimal edge and spacing distances
Three embedment depths for maximum design flexibility
2. HSA Wedge anchor Technical Parameters
Parameter | Specification | Notes |
Thread Size | M6–M20 | Available in various diameters |
Embedment Depth | Varies by size | Three depth options |
Temperature Range | -40°C to +80°C | In-service conditions |
Load Capacity | Up to high kN range | Depends on size and conditions |
Hole Type | Diamond cored | ETA-approved with DD 30-W system |
3. HSA Wedge anchor Performance Data
Key performance metrics include high tensile and shear loads, suitability for small edge distances, and reliable performance in uncracked concrete.
Superior load-bearing capacity in concrete
Suitable for both pre- and through-fastening applications
Compatible with diamond cored holes (ETA-approved)
Long lengths available for wood structure fastening
4. HSA Wedge anchor Installation Guide
Step | Action | Tools/Requirements |
1 | Drill hole | Diamond core bit DD 30-W |
2 | Clean hole | Brush and air blower |
3 | Insert anchor | Hand or light hammer setting |
4 | Tighten anchor | Impact wrench with SIW 6AT-A22 |
5 | Torque control | SI-AT-A22 automatic system |
5. HSA Wedge anchor Application Scenarios
Application | Recommended Spec | Conditions |
Wood structure mounting | M12–M20 | Uncracked concrete |
Pre-fastening | M10–M16 | Diamond cored hole |
Through-fastening | M6–M20 | Standard concrete |
High-load anchoring | M16–M20 | Minimal edge distance |
6. Certifications & Compliance
(1) ETA approved for diamond cored holes
(2) Compliant with international anchoring standards
(3) Tested under seismic and static loading conditions
(4) Suitable for use in fatigue and fire-resistant designs (subject to regional approvals
Send Message
