Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HSA-F Wedge anchor
Anchor size：M8/M10/M12/M16/M20
Anchor length:55 mm-225 mm
Pack size:10 pc/16 pc/25 pc/40 pc/50 pc/80 pc/100 pc
1. Product Overview
HSA-F Wedge anchor – A high-performance mechanical anchor for reliable fastening in uncracked concrete.
Combines high-strength carbon steel bolt with corrosion-resistant stainless steel sleeve
Hot-dip galvanized coating provides excellent corrosion protection
Delivers high load capacity with minimal edge distances
2. HSA-F Wedge anchor Technical Parameters Table
Parameter | Specification | Notes |
Bolt Material | Carbon Steel 1.0501/1.1172 (18MnV5) | High tensile strength |
Corrosion Protection | Hot-dip galvanized (242 μm) | Enhanced durability |
Sleeve Material | Stainless Steel A2, 1.4301 | Corrosion resistant |
Nut Strength Class | DIN 934 Class 8 | Hot-dip galvanized |
Washer Standard | DIN 125, 140HV | Hot-dip galvanized |
Temperature Range | -40°C to +80°C | In-service conditions |
3. HSA-F Wedge anchor Performance Data
Engineered for superior performance in concrete applications with high reliability and consistent results.
(1) Excellent load transfer through optimized expansion mechanism
(2) Corrosion protection suitable for humid and moderate chemical environments
(3) Consistent performance in static and dynamic loading conditions
(4) Reliable performance in temperature variations within specified range
4. HSA-F Wedge anchor Installation Guide Table
Step | Action | Tools/Requirements |
1 | Drill hole to diameter | Rotary hammer, carbide bit |
2 | Clean hole completely | Brush, air blower |
3 | Insert anchor into hole | Hand placement |
4 | Tighten nut to secure | Standard wrench |
5 | Apply final torque | Torque wrench |
5. HSA-F Wedge anchor Application Scenarios
Application | Recommended Spec | Conditions |
Structural Steel Connections | M16-M20 | Uncracked concrete C20/25 |
Mechanical Equipment anchoring | M12-M16 | Indoor environments |
Building Facade Systems | M10-M16 | Moderate environmental exposure |
Industrial Machinery Bases | M12-M20 | Static and dynamic loads |
6. Certifications & Compliance
(1) ETA (European Technical Assessment) approved
(2) Compliant with EN 1992-4 design standard
(3) Tested for seismic loading conditions (ETA category C1)
(4) Fire resistance evaluation according to ETA guidelines
(4) Corrosion resistance certified per relevant ISO standards
Send Message
