Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HIT-RE 500 V4 Epoxy anchor
Content per can/cartridge：330ml/500ml/1400ml
Base materials：Concrete (cracked), Concrete (uncracked), Some types of natural stone, Wood
Base material condition：Dry, Submerged, Water-filled, Wet
Approvals / test reports：BZS/shock, ETA, Fire, Seismic
Seismic loading：Yes
Fatigue loading：Yes
Fire resistance：Yes
PROFIS software：Yes
Anchoring elements：HAS-U threaded rods, HIS-N internally threaded sleeves, HIT-V threaded rods, HZA tension anchors, Rebar
Environmental conditions：Outdoor, Underwater, fresh water, Underwater, salty water
Cleaning procedures：Automatic cleaning (SafeSet hollow drill bit), Manual cleaning
Storage and transportation temperature range：5 - 25 °C
In-service temperature – range：-40 - 75 °C
Free of styrene：Yes
Type of fastening：Pre-fastening, Through-fastening
1. HIT-RE 500 V4 Epoxy anchor Product Overview
HIT-RE 500 V4 Epoxy anchor – the ultimate ETA-compliant epoxy mortar for every concrete-to-concrete and steel-to-concrete connection.
Works in diamond-cored, wet, water-filled or even submerged holes
Delivers top bond strength in cracked concrete and seismic C2 conditions
Cures down to -5 °C and resists long-term temperatures up to +75 °C
Styrene-free, odourless and SafeSet-ready for faster, safer jobsites
2. HIT-RE 500 V4 Epoxy anchor Technical Parameters Table
Parameter | Specification | Notes |
Cartridge sizes | 330 ml / 500 ml / 1400 ml | Net content |
Storage temp. range | 5 – 25 °C | Keep cartridges sealed |
In-service temp. range | -40 – +75 °C | Short-term peak +75 °C |
Base material temp. min | -5 °C | At time of installation |
Working time (20 °C) | 30 min | In dry base material |
Curing time (20 °C) | 7 h | Double in wet base material |
3. HIT-RE 500 V4 Epoxy anchor Performance Data Table
Rebar Ø (mm) | Hole depth (mm) | Design bond resistance (MPa) – cracked C2 |
12 | 144 | 9.5 |
16 | 192 | 9.0 |
20 | 240 | 8.5 |
25 | 300 | 8.0 |
100-year design life verified by ETA
High corrosion resistance in fresh and salty water
Fatigue and shock loading approved up to seismic C2
Fire resistance rating R120/E240 per EN 13501-2
4. HIT-RE 500 V4 Epoxy anchor Installation Guide Table
Step | Action | Tools/Requirements |
1 | Core or hammer drill | Hilti SafeSet bit |
2 | Brush and blow twice | Hilti HIT-RB brush |
3 | Attach static mixer | Dispenser TE 6-A36 |
4 | Fill hole from bottom | Slight backflow |
5 | Insert rebar/anchor | Twist while pushing |
6 | Wait full cure time | Check temperature |
5. HIT-RE 500 V4 Epoxy anchor Application Scenarios
Application | Recommended Spec | Conditions |
Slab extension with rebar | 16 mm Ø, 192 mm embedment | Cracked concrete C30/37 |
Steel column baseplate | M20 HIT-V rod, 170 mm h | Seismic C2, outdoor |
Bridge deck retrofit | 25 mm Ø rebar, 300 mm h | Submerged fresh water |
Timber CLT wall anchorage | HIS-N M12 sleeve, 110 mm | Dry or moist wood |
6.Certification & Compliance
ETA-21/0426: post-installed rebar incl. seismic C1/C2 and fire R120/E240
ETA-21/0425: anchorages in cracked/uncracked concrete C20/25-C50/60
BZS/shock test: validated for impact loads up to 35 kN
Fire test: EN 13501-2, R120/E240 at 800 °C for 120 min
Seismic test: ICC-ES AC446 (USA) & AS 5216:2021 (Australia)
100-year working life: EOTA TR069 methodology
Send Message
