Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HIT-RE 10 injection mortar
Capacity per can/magazine: 0.58 l
Substrate: Concrete (without cracks)
Substrate condition: Dry, wet
seismic load:No
Fatigue load:No
fire prevention: No
PROFIS software: No
Anchorage: HIT-V fully threaded screw, steel reinforcement
Environmental conditions: Indoor, brief humidity/condensation, outdoor (more than 1 kilometer away from the coast), dry indoor, high corrosion special applications (such as tunnels, swimming pools)
cleaning procedures: Manual cleaning
Storage and transportation temperature range: 5 - 25 °C
Temperature Range in Service: -40 - 55 °C
Free of styrene: yes
quality inspection: pass
Benefits :
- Suitable for non-cracked concrete
C20/25 to C50/60
- Suitable for dry and water
saturated concrete
- Suitable for overhead fastenings
1. Product Overview
HIT-RE 10 injection mortar - Hilti's advanced chemical anchoring solution for superior performance in non-cracked concrete applications.
Excellent performance in both dry and water-saturated concrete
Reliable overhead installation capability
Suitable for static and quasi-static loading conditions
Compatible with hammer drilling installation methods
2. HIT-RE 10 injection mortar Technical Parameters
Parameter | Specification | Notes |
Cartridge Size | 580 ml | Hard cartridge |
Concrete Grade | C20/25-C50/60 | Non-cracked concrete |
Installation Method | Hammer drilling | Variable embedment depth |
Load Type | Static/Quasi-static | |
Service Temperature | -40°C to +70°C | After curing |
Base Material | Concrete | Dry/wet conditions |
3. HIT-RE 10 injection mortar Performance Data
Performance Advantages:
Provides high bond strength in various concrete conditions
Maintains consistent performance in overhead applications
Offers reliable load capacity for structural applications
Ensures long-term durability in diverse environmental conditions
4. Installation Guide
Step | Action | Tools/Requirements |
1 | Drill hole | Hammer drill |
2 | Clean hole | Brush, blower |
3 | Inject mortar | Dispensing tool |
4 | Insert anchor | Manual placement |
5 | Cure properly | Time dependent |
5. Application Scenarios
Application | Recommended Spec | Conditions |
Structural anchoring | HIT-RE 10 | Non-cracked concrete |
Overhead installations | HIT-RE 10 | Dry/wet conditions |
Rebar connections | HIT-RE 10 | Static loading |
Equipment mounting | HIT-RE 10 | Quasi-static loads |
6. Certifications & Compliance
Hilti Technical Data Certification (2017-11-28)
Complies with EN 1992-4 anchor design standards
Suitable for non-cracked concrete applications
Approved for static and quasi-static loading conditions
Validated for use in dry and water-saturated concrete
Send Message
