Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HIT-IC Anchor Rod
Size: M8 M10 M12
Length: 45 mm 80 mm
Material composition: Steel, zinc-plated
Head configuration: Inner thread
Pack size:10 pc
Material, corrosion: Carbon steel, zinc-plated
Environmental conditions:Dry indoor
Base materials: Masonry (hollow), Masonry (solid)
PROFIS software:No
Cleaning procedures: Manual cleaning
Type of fastening: Pre-fastening
Features & Applications
1. Product Overview
HIT-IC anchor system - Hilti's versatile mechanical anchor solution for reliable masonry fastening applications.
Enables flush surface installation for neat finishes
Allows reuse of fastening points when needed
Suitable for both hollow and solid masonry substrates
Works with Hilti HIT injectable adhesive mortar systems
2. HIT-IC Anchor Rod Technical Parameters
Parameter | Specification | Notes |
Anchor Sizes | M8, M10, M12 | Metric threading |
Anchor Length | 45 mm, 80 mm | Two length options |
Material | Carbon steel | Zinc-plated finish |
Head Type | Inner thread | Internal threading |
Pack Quantity | 10 pieces | Standard packaging |
Corrosion Protection | Zinc plating | Basic corrosion resistance |
3. HIT-IC Anchor Rod Performance Data
Performance Advantages:
Provides secure fastening in various masonry materials
Maintains reliable load capacity in approved applications
Offers clean aesthetic finish with flush installation
Ensures compatibility with Hilti injection mortar systems
4. HIT-IC Anchor Rod Installation Guide
Step | Action | Tools/Requirements |
1 | Clean sealing surfaces | Solvent and lint-free cloth |
2 | Verify gasket dimensions | Calipers and specification chart |
3 | Position gasket properly | Align with bolt holes |
4 | Tighten bolts gradually | Torque wrench and crisscross pattern |
5 | Final torque application | To specified values |
5. HIT-IC Anchor Rod Application Scenarios
Application | Recommended Spec | Conditions |
Sun blinds mounting | HIT-IC system | Masonry substrates |
Hollow masonry | With HIT-SC sleeves | Dry indoor conditions |
Solid masonry | With HIT mortar | Indoor environments |
Architectural fixtures | HIT-IC anchors | Flush finish required |
6. Certifications & Compliance
Hilti Technical Data approval
Suitable for dry indoor environments
Complies with mechanical anchor standards
Approved for masonry applications
Meets basic corrosion resistance requirements
Send Message
