HIT-HY 270 Adhesive anchor

Hilti Fastener: HIT-HY 270 Adhesive anchor

Product name: HIT-HY 270 Adhesive anchor
Content per can/cartridge: 330 ml/500 ml
Pack size: 1 pc /20 pc
Ultimate-performance injectable hybrid mortar with approvals for fastening and retrofitting in hollow and solid masonry
Base materials: Masonry (hollow), Masonry (solid)
Base material condition: Dry, Wet
Approvals / test reports: ETA, Fire
Base materials: Masonry (hollow), Masonry (solid)
Base material condition: Dry, Wet
Approvals / test reports: ETA, Fire

Quantity

Contact Now

add to cart

1. Product Overview

HIT-HY 270 Adhesive anchor – A versatile two-component hybrid mortar for superior chemical anchoring in masonry and concrete.

(1)Two-component hybrid mortar for multiple base materials

(2)ETA-approved for seismic loads in specific masonry

(3)Suitable for overhead installations and flexible setting depths

(4)Enables small edge distances and anchor spacing

2. HIT-HY 270 Adhesive anchor Technical Specifications

Parameter	Specification	Notes
Package Size	330 ml, 500 ml	Foil pack
Base Material	Hybrid mortar	Two-component
Free of Styrene	Yes	Enhanced environmental profile
Seismic Loading	Suitable	ETA-approved for solid clay bricks
Fire Resistance	See ETA	Performance depends on application
Service Temperature	-40°C to +70°C	In-service range

3. HIT-HY 270 Adhesive anchor Performance Data

High load capacity in hollow and solid masonry substrates.

Excellent fatigue resistance for long-term dynamic loading.

Reliable performance in cracked concrete and various masonry blocks.

Fast curing allows for efficient installation and early loading.

4. Installation Guide

Step	Action	Tools/Requirements
1	Drill clean hole	Rotary hammer drill, correct bit size
2	Clean hole thoroughly	Brush, blow-out pump
3	Inject mortar	HDE dispenser gun
4	Insert anchor rod	Rotate slowly for even distribution
5	Allow mortar to cure	Avoid loads during curing time

5. Application Scenarios

Application	Recommended Spec	Conditions
Fastening in hollow bricks	HIT-HY 270	Standard anchor rods
Structural anchoring in solid clay bricks	HIT-HY 270	Seismic zones (check ETA)
Overhead fastenings in concrete blocks	HIT-HY 270	Use suitable anchor rod
Facade and rail installations	HIT-HY 270	Check specific rod compatibility

6. Certifications & Compliance

ETA (European Technical Assessment) according to EOTA TR 054.

Approved for use in seismic loading conditions (specific to solid clay bricks like Rosso Vivo/Classico per ETA)

Compliance with relevant European and international assessment guidelines

Send Message