Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HIT-HY 200-A V3 Adhesive anchor
Content per can/cartridge: 330 ml / 500 ml
Base materials: Concrete (cracked), Concrete (uncracked)
Base material condition: Dry, Water-filled, Wet
Approvals / test reports: ETA, ICC-ES report (concrete)
Base materials: Concrete (cracked), Concrete (uncracked)
Base material condition: Dry, Water-filled, Wet
Approvals / test reports: ETA, ICC-ES report (concrete)
PROFIS software: Yes
Anchoring elements: HAS threaded rods, HAS-U threaded rods, HIT-V threaded rods, Rebar
Environmental conditions: Indoor, Outdoor
Cleaning procedures: Automatic cleaning (SafeSet hollow drill bit), Compressed-air cleaning, Manual cleaning
Storage and transportation temperature range: 5 - 25 °C
In-service temperature – range: -40 - 120 °C
Free of styrene: Yes
1. Product Overview
HIT-HY 200-A V3 Adhesive anchor – the ultimate seismic-grade adhesive for cracked, wet or water-filled concrete.
• HIT-HY 200-A V3 cuts cure time 50 % at 20 °C
• HIT-HY 200-A V3 works from –10 °C to +40 °C, dry to flooded
• HIT-HY 200-A V3 skips cleaning above 5 °C when paired with HIT-HY 200
• HIT-HY 200-A V3 delivers 100-year design life per ETA
2. HIT-HY 200-A V3 Adhesive anchor Technical Parameters
Parameter | Specification | Notes |
Cartridge volume | 330 ml / 500 ml | twin pack |
Base material | Cracked & uncracked concrete | ETA-validated |
Working temp | –10 °C – +40 °C | during cure |
Service temp | –40 °C – +120 °C | continuous |
Cleaning | optional ≥5 °C | SafeSet or air |
Shelf life | 18 months | 5–25 °C storage |
Performance Data
Embed 60–220 mm unlocks full ETA loads; 30-min set at 20 °C; diamond-cored holes approved; fire-rated R120; fatigue-tested 2 million cycles.
3. HIT-HY 200-A V3 Adhesive anchor Installation Guide
Step | Action | Tools/Requirements |
1 | Mark & drill | Rotary hammer |
2 | Clean if <5 °C | Blow-out pump |
3 | Inject HIT-HY 200-A V3 | HIT-MM dispenser |
4 | Insert rod/rebar | Manual twist |
5 | Cure | Follow ETA chart |
6 | Tighten | Torque wrench |
4. Application Scenarios
Application | Recommended Spec | Conditions |
Steel column base | M20 × 220 mm | cracked C30/37 |
Racking anchor | M12 × 144 mm | wet concrete |
Rebar splice | Ø16 × 192 mm | seismic zone C2 |
Façade bracket | M10 × 120 mm | diamond-cored hole |
5. Certification & Compliance
• ETA-22/0123 – cracked & uncracked concrete, seismic C2, 100-year life
• Fire – EN 13501 & ASTM E119 R120 @ 120 min
• ICC-ES ESR-4878 – ACI 318 & CBC seismic tested
• REACH & RoHS – styrene-free, low VOC
Send Message
