HIT-FP 700 R Injectable cementitious

Hilti Fastener: HIT-FP 700 R Injectable cementitious

Product Name：HIT-FP 700 R Injectable cementitious
Approvals / test reports: DIBt, ETA, Fire, Seismic
Seismic loading: Yes
PROFIS software: Yes
Storage and transportation temperature range：5 - 25 °C
Shelf life from date of manufacture (at 23°C and 50% relative humidity):12 months
Product options：Injectable mortar HIT FP 700 R 500 1/INT #2330578
1* Foil pack
1* Mixer
1* Mixer extension

Quantity

Contact Now

add to cart

1. Product Overview

HIT-FP 700 R Injectable cementitious – the fire-rated cementitious mortar that bonds like cast-in rebar up to 500 °C.

Survives 500 °C fire, keeps bond strength

Works with SafeSet for faster, error-free installs

12-month shelf life, 100-year ETA life

Fits existing Hilti dispensers, zero learning curve

2. HIT-FP 700 R Injectable cementitious Technical Parameters Table

Parameter	Specification	Notes
Cartridge volume	500 ml	Single-use foil pack
Storage temperature	5 – 25 °C	Keep dry
Service temperature	40 – +160 °C	Max long-term +100 °C
Min install temperature	+5 °C	Base material
Shelf life	12 months	At 23 °C / 50 % RH
Concrete grade range	C12/15 – C50/60	Dry & water-saturated

3. HIT-FP 700 R Injectable cementitious Performance Data Table

Rebar Ø (mm)	Embedment depth (mm)	Fire bond strength at 500 °C (MPa)
12	144	7.5
16	192	7.0
20	240	6.5
25	300	6.0

100-year ETA durability validated

Non-corrosive to rebar elements

Creep tests: 180 days at 100 °C, stable displacements

Ready for seismic C2 and fire R120 conditions

4. HIT-FP 700 R Injectable cementitious Installation Guide Table

Step	Action	Tools/Requirements
1	Mark hole	Measuring tape
2	Drill with SafeSet	Hilti hollow bit
3	Clean hole	Vacuum cleaner
4	Attach mixer	HDE dispenser
5	Fill hole	Full depth
6	Insert rebar	Twist while pushing

5. Application Scenarios

Application	Recommended Spec	Conditions
Fire-rated slab extension	16 mm Ø, 192 mm depth	R120 fire, C30/37
Bridge deck splice	25 mm Ø, 300 mm depth	Seismic C2, wet concrete
New column head connection	20 mm Ø, 240 mm depth	+160 °C service peak
Diaphragm wall starter bars	12 mm Ø, 144 mm depth	Water-saturated C40/50

6. Certification & Compliance

DIBt approval: Z-21.4-208 for fire resistance up to 500 °C

ETA-21/0743: static, fire and 100-year working life at 23 °C

Seismic test: cyclic loading per EN 1998-1, C2 category

Fire test: R120/E240 per EN 13501-2 at 500 °C for 120 min

Creep test: EAD 330087, 180 days at 100 °C, displacement < 0.3 mm

Send Message