Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HIT-1 Adhesive anchor
Content per can/cartridge: 300 ml
Pack size: 1 pc
Approvals / test reports: ETA
PROFIS software: No
Storage and transportation temperature range: 5 - 25 °C
Approvals / test reports: ETA
PROFIS software: No
Shelf life from date of manufacture (at 23°C and 50% relative humidity): 12 months
Product options:
Injectable mortar HIT-1
#2173259
1x Cartridge
Economical hard-cartridge injectable mortar for anchoring in concrete and masonry
1. Product Overview
HIT-1 Adhesive anchor – Advanced chemical anchoring for high-performance and fast-curing applications.
Two-component hybrid mortar system
Rapid curing even in overhead installations
Minimal edge and spacing requirements
2. HIT-1 Adhesive anchor Technical Specifications
Parameter | Specification | Notes |
Cartridge Size | 300 ml | Tube cartridge |
Base Material | Hybrid mortar | Two-component chemical |
Free of Styrene | Yes | Environmentally improved |
Fire Resistance | Yes | Classified per standards |
Seismic Performance | Suitable | Under specific conditions |
3. HIT-1 Adhesive anchor Performance Data
Performance Advantages:
(1)High load capacity in cracked and uncracked concrete
(2)Excellent fatigue resistance under dynamic loads
(3)Reliable performance in temperatures from -40°C to +80°C
(4)Fast curing allows early loading
4. Installation Guide
Step | Action | Tools/Requirements |
1 | Drill hole | Rotary hammer drill |
2 | Clean hole | Brush and blower |
3 | Inject mortar | Dispensing tool |
4 | Insert anchor rod | Slowly rotate |
5 | Allow curing | Avoid disturbance |
5. Application Scenarios
Application | Recommended Spec | Conditions |
Overhead fastening | HIT-1 300ml | Dry or damp concrete |
Structural anchoring | HIT-1 CE | Cracked concrete |
Machinery foundation | HIT-1 | Indoor/outdoor use |
Rail and barrier mounting | HIT-1 CE | Dynamic loading conditions |
6. Certifications & Compliance
EN 1992-4: Design of fastenings for use in concrete
ETA (European Technical Assessment)
Suitable for seismic loading per region-specific standards
Fire resistance certification available
Send Message
