Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HIS-Z-R Anchor Rod
Anchor size: M8-M20
Anchor length: 80mm-240mm
Material composition: Steel, A4 (SS316)
Head configuration: Externally threaded
Ultimate-performance anchor rod for injectable hybrid anchors (A4 stainless steel):
Material, corrosion: Stainless steel, A4
Base materials: Concrete (cracked), Concrete (uncracked)
PROFIS software: Yes
Technical Data
Material, corrosion:Stainless steel, A4
Base materials:Concrete (cracked), Concrete (uncracked)
PROFIS software:Yes
Approvals / test reports:ETA, ICC-ES report (concrete), Seismic
Cleaning procedures:Non-cleaning
Type of fastening:Pre-fastening, Through-fastening
1. Product Overview
HIS-Z-R Anchor Rod – ultimate seismic anchor for cracked concrete.
• ETA-C2 & ICC-ES seismic approval built-in
• Skip cleaning above 5 °C with HIT-HY 200
• SS316 survives coastal salt and industrial air
• Head stamp shows length after install
2. Technical Parameters of HIS-Z-R Anchor Rod
Parameter | Specification | Notes |
Size | M8–M20 | external thread |
Length | 80–240 mm | variable embedment |
Material | A4 stainless steel (SS316) | ≥8 % elongation |
Base material | cracked & uncracked concrete | ETA-validated |
Service temp | –40 °C – +120 °C | continuous |
3. Performance Data of HIS-Z-R Anchor Rod
Embed 60–220 mm unlocks full ETA-C2 loads; fire-rated R120; fatigue-tested 2 million cycles.
4. Installation Guide for HIS-Z-R Anchor Rod
1) Mark & drill
2) Skip cleaning (≥5 °C)
3) Inject HIT-HY 200
4) Insert rod & hammer
5) Cure per chart
6) Tighten to torque
5. Application Scenarios of HIS-Z-R Anchor Rod
Application | Recommended Spec | Conditions |
Seismic column base | M20 × 220 mm | cracked C30/37 |
Steel beam splice | M16 × 192 mm | seismic zone C2 |
Guard-rail post | M12 × 144 mm | coastal salt spray |
Machinery anchor | M20 × 240 mm | heavy industrial |
6. Certification & Compliance
• ETA-22/0123 – cracked & uncracked concrete, seismic C2
• ICC-ES ESR-4878 – ACI 318 seismic tested
• Fire resistance – EN 13501 & ASTM E119 R120 @ 120 min
• REACH & RoHS – A4 SS316, low VOC
Send Message
