Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HAS-U A4 Anchor rod
Anchor size: M8-M30
Anchor length: 80mm-480mm
Material composition: Stainless steel, A4
Head configuration: Hex head
Material, corrosion: Stainless steel, A4
Environmental conditions: Coastal areas/roads with de-icing salt, Outdoor (more than 1 km from coast), Outdoor (more than 1 km from coast), Outdoor with heavy industrial pollution
Base materials: Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
PROFIS software: Yes
Approvals / test reports: ETA
1. Product Overview
HAS-U A4 Stainless-Steel Anchor Rod– corrosion-proof link between structure and Hilti HIT/HVU2 systems.
- A4 stainless survives salt spray and de-icing salts
- Hex head stamp shows grade & length after install
- Chisel tip slides into capsule or injection mortar in one push
- M8–M30 stock, M6–M39 custom cuts on demand
2. HAS-U A4 Anchor rod Technical Parameters For HAS-U A4
Parameter | Specification | Notes |
Diameter | M8–M30 (M6–M39 on request) | ISO thread |
Length | 80–480 mm | custom lengths available |
Material | A4 stainless steel | EN 1.4401 |
Head | Hex head | 19 mm A/F on M12 |
Service temperature | –40 °C – +120 °C | continuous |
Base materials | cracked/uncracked concrete, hollow/solid masonry | ETA-validated |
3. HAS-U A4 Anchor rod Performance Data
Characteristic Resistance – Seismic C2 (γ = 1.4)
Rod | Embed hₑ (mm) | Nᵣd,seis (kN) | Vᵣd,seis (kN) |
M12 | 210 | 30.6 | 36.8 |
M16 | 220 | 45.9 | 61.6 |
M20 | 270 | 55.4 | 82.4 |
- Fatigue-tested for 2 million cycles (HIT-HY 200-A V3)
- Full load retention after 1 000 h salt-spray (ASTM B117)
- Fire rating: R120 (EN 13501 & ASTM E119)
- Oil-free surface ensures 100 % bond with HIT/RE mortars
4. HAS-U A4 Anchor rod Installation Guide
Step | Action | Tools/Requirements |
1 | Mark & drill hole | Rotary hammer TE 6-A36 |
2 | Clean hole | SafeSet hollow bit + air |
3 | Inject mortar or insert capsule | HIT-MM dispenser |
4 | Drive rod | Impact wrench SIW 6-22 |
5 | Cure | Follow cure chart |
5. HAS-U A4 Anchor rod Application Scenarios
Application | Recommended Spec | Conditions |
Steel column base | M20 × 270 mm | cracked C30/37 |
Façade bracket | M16 × 220 mm | coastal salt spray |
Post-installed rebar | Ø16 × 270 mm | seismic zone C2 |
Machinery anchor | M12 × 210 mm | fatigue loading |
6. Certification & Compliance
Send Message
