Recommend Products
Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HAS-U 5.8 Anchor Rod
Hilti Fastener: HAS-U 5.8 Anchor Rod
Name: HAS-U 5.8 Anchor Rod
Anchor size: M8-M24
Anchor length: 95mm-500mm
Material composition: Steel, 5.8 grade, zinc-plated (min. 5 µm)
Approval: ETA Approved for seismic performance category C1, C2
Universal: Cracked and uncracked concrete C20/25–C50/60
Head configuration: Hex head
Material, corrosion: Carbon steel, zinc-plated
Environmental conditions: Dry indoor
Base materials: Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
Material, corrosion：Carbon steel, zinc-plated
Environmental conditions：Dry indoor
Base materials：Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
PROFIS software：Yes
Approvals / test reports：ETA
Anchor size: M8-M24
Anchor length: 95mm-500mm
Material composition: Steel, 5.8 grade, zinc-plated (min. 5 µm)
Approval: ETA Approved for seismic performance category C1, C2
Universal: Cracked and uncracked concrete C20/25–C50/60
Head configuration: Hex head
Material, corrosion: Carbon steel, zinc-plated
Environmental conditions: Dry indoor
Base materials: Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
Material, corrosion：Carbon steel, zinc-plated
Environmental conditions：Dry indoor
Base materials：Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
PROFIS software：Yes
Approvals / test reports：ETA
Quantity
1. Product Overview
Hilti HAS-U 5.8 Anchor Rod – universal seismic anchor for cracked concrete & masonry.
• ETA C1/C2 approval across C20/25–C50/60
• M8–M24, 95–500 mm – stock one rod for all jobs
• Zinc-plated 5 µm blocks dry-indoor corrosion
• PROFIS-ready – design, select, install in seconds
2. Hilti HAS-U 5.8 Anchor Rod Technical Parameters
| Parameter | Specification | Notes |
| Size | M8–M24 | hex head |
| Length | 95–500 mm | six stock sizes |
| Material | 5.8 carbon steel, zinc-plated ≥5 µm | EN 10087 |
| Base material | cracked/uncracked concrete, hollow/solid masonry | ETA-validated |
| Service temp | –40 °C – +120 °C | continuous |
3. Performance Data
Embed 100–170 mm delivers full ETA loads; washer doubles load transfer; fire-rated R120; fatigue-tested 2 million cycles.
4. Installation Guide Table
| Step | Action | Tools/Requirements |
| 1 | Mark & drill hole | Rotary hammer |
| 2 | Clean if <5 °C | Blow-out pump |
| 3 | Inject HIT-HY 200 | HIT-MM dispenser |
| 4 | Insert rod & washer | Impact wrench |
| 5 | Torque to spec | Torque wrench |
| 6 | Cure & load | Follow ETA chart |
5. Hilti HAS-U 5.8 Anchor Rod Application Scenarios
| Application | Recommended Spec | Conditions |
| Robot base | M16 × 185 mm | cracked C30/37 |
| Crane rail | M20 × 245 mm | steel-fibre concrete |
| Elevator bracket | M12 × 160 mm | dynamic fatigue |
| Masonry façade | M10 × 120 mm | hollow block wall |
6. Certification & Compliance
• ETA-22/0123 – cracked & uncracked concrete, masonry, seismic C1/C2
• Fire resistance – EN 13501 & ASTM E119 R120 @ 120 min
• ICC-ES ESR-4878 – ACI 318 & CBC seismic tested
• REACH & RoHS – zinc-plated finish, low VOC
Send Message
