HAS-HCR-TZ Anchor rod

Hilti Fastener: HAS-HCR-TZ Anchor rod

Product name: HAS-HCR-TZ Anchor rod
Anchor size: M10 M12
Anchor length: 158 mm 159 mm
Material composition: Steel, high corrosion resistant (HCR)
Head configuration: Externally threaded
Pack size: 10 pc

Ultimate-performance anchor rod for adhesive capsules (high corrosion resistance)
Material, corrosion: Stainless steel, HCR (high corrosion resistance)
Environmental conditions: Highly corrosive special applications (e.g. tunnels, swimming pools), Underwater, salty water
Base materials: Concrete (cracked), Concrete (uncracked)
Material, corrosion
Stainless steel, HCR (high corrosion resistance)
Environmental conditions:Highly corrosive special applications (e.g. tunnels, swimming pools), Underwater, salty water
Base materials: Concrete (cracked), Concrete (uncracked)
PROFIS software: Yes
Approvals / test reports:BZS/shock, ETA, Fatigue, Fire
Type of fastening: Pre-fastening

Quantity

Contact Now

add to cart

1. Product Overview
HAS-HCR-TZ Anchor rod – High-performance chemical anchor rods for structural fastening in cracked and uncracked concrete.

Superior tensile and shear resistance in demanding conditions

Excellent performance under seismic and fatigue loading

Corrosion-resistant option (HCR) for harsh environments

Reliable in both static and dynamic applications

2. HAS-HCR-TZ Anchor rod Technical Parameters

Parameter	Specification	Notes
Anchor Sizes	M10, M12, M16	Thread range available
Effective Depth (hₑf)	75–125 mm	Varies by anchor size
Min. Base Thickness	150–250 mm	Depends on anchor size and type
Service Temperature	-40°C to +80°C	In-service range
Fire Resistance	Up to 120 minutes	System-dependent performance

3. HAS-HCR-TZ Anchor rod Performance Data

Anchor Size	Embedment Depth (mm)	Tensile Resistance(kN)	Shear Resistance(kN)
M10x75	75	10.0	4.5
M12x95	95	16.0	8.5
M16x105	105	20.0	15.0
M16x125	125	26.0	15.0

Characteristic resistance in non-cracked concrete. Design resistance values apply with safety factors.

High load capacity in cracked and non-cracked concrete

Consistent performance under dynamic and fatigue loads

HCR version offers enhanced corrosion protection

Suitable for use in seismic zones

4. HAS-HCR-TZ Anchor rod Installation Guide

Step	Action	Tools/Requirements
1	Drill hole to correct depth	Hilti drill, specified diameter
2	Clean hole thoroughly	Hilti brush, air blower
3	Inject Hilti chemical resin	Hilti injection system
4	Insert rod with rotation	Hand tool, slow insertion
5	Allow full curing time	Avoid loading prematurely

5. HAS-HCR-TZ Anchor rod Application Scenarios

Application	Recommended Spec	Conditions
Structural beam connections	HAS-HCR-TZ M16	Cracked concrete, high vibration
Bridge expansion joints	HAS-TZ M12–M16	Outdoor, dynamic traffic loads
Industrial machinery bases	HAS-HCR-TZ M10–M16	Corrosive environments
Facade and railing systems	HAS-TZ M10–M12	Seismic, wind loads

6. Certifications & Compliance

ETA-17/0200 – European Technical Approval

ICC-ES – US and international code compliance

Seismic performance per AC156 and EN 199

Fatigue testing in accordance with EN 1993-1-9

Fire resistance certified per EN 13501-2

SEO Title:
HAS-TZ and HAS-HCR-TZ Chemical Anchor Rods – Hilti High-Strength Fastening for Structural Applications

SEO Description:
HAS-TZ and HAS-HCR-TZ chemical anchor rods by Hilti deliver high tensile and shear resistance in cracked concrete, seismic conditions, and corrosive environments. Trusted globally.

Send Message