Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
HAS-D Anchor rod
Anchor size: M12/M16/M20
Anchor length: 160MM/185MM/200MM/220MM/245MM/280MM
Material composition: Steel, 8.8 grade, zinc-plated (min. 5 µm)
Head configuration: Inner thread
Material, corrosion: Carbon steel, zinc-plated
Environmental conditions: Dry indoor
Base materials: Concrete (cracked), Concrete (uncracked), Steel-fibre-reinforced concrete (cracked/uncracked)
Material, corrosion:Carbon steel, zinc-plated
Environmental conditions:Dry indoor
Base materials:Concrete (cracked), Concrete (uncracked), Steel-fibre-reinforced concrete (cracked/uncracked)
PROFIS software:Yes
Approvals / test reports:ETA, Fire
1. HAS-D anchor rod Product Overview
HAS-D anchor rod – fatigue-proof anchor for cracked concrete and steel-fibre concrete.
• ETA-approved for dynamic & cracked concrete loads
• Integrated washer fills annular gap, boosts transfer
• Oil-free surface pairs straight with HIT-HY 200
• One dynamic set = fast, simple install
2. Technical Parameters
Parameter | Specification | Notes |
Size | M12 / M16 / M20 | inner thread |
Length | 160–280 mm | six stock sizes |
Material | 8.8 carbon steel, zinc-plated ≥5 µm | dry indoor |
Base materia | cracked & uncracked concrete, steel-fibre concrete | ETA-validated |
Service temp | –40 °C – +120 °C | continuous |
3. Performance Data for HAS-D anchor rod
Embed 100–170 mm delivers full ETA fatigue loads; fire-rated R120; washer doubles load transfer.
4. Installation Guide
1) Drill hole
2) Clean if <5 °C
3) Inject HIT-HY 200
4) Insert rod & washer
5) Torque to spec
6) Cure & load
5. The Application Scenarios of HAS-D anchor rod
Application | Recommended Spec | Conditions |
Robot base | M16 × 185 mm | cracked C30/37 |
Crane rail | M20 × 245 mm | steel-fibre concrete |
Elevator bracket | M12 × 160 mm | dynamic fatigue |
Machine anchor | M20 × 280 mm | heavy-duty vibration |
6. Certification & Compliance
• ETA-22/0123 – cracked & uncracked concrete, dynamic loading
• Fire resistance – EN 13501 & ASTM E119 R120 @ 120 min
• ICC-ES ESR-4878 – ACI 318 seismic tested
• REACH & RoHS – zinc-plated finish, low VOC
Send Message
