Recommend Products
Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
China Suppliers Thread Stud
QS Fastener: China Suppliers Thread Stud
Name: China Suppliers Thread Stud
Dimension: 3/4 IN
Material: ASTM A193 B8, SS 304
Total Length: 80 mm
Standard: ASME B18.31.2
Dimension: 3/4 IN
Material: ASTM A193 B8, SS 304
Total Length: 80 mm
Standard: ASME B18.31.2
Quantity
When sourcing critical fasteners, the choice of **China suppliers** often comes down to consistency and material integrity. The Jiaxing Dual Thread Stud is one of those rare products that actually delivers on both fronts—engineered for services that demand high strength, reliable corrosion protection, and stable long-term performance under real operating conditions.
This particular thread stud is fully manufactured to ASME B18.31.2, which means it meets the dimensional and general requirements for continuous thread studs, double-end studs, and flange bolting studs in inch series. At 3/4 IN nominal size and 80 mm total length, it fits a wide variety of industrial flanges, valve assemblies, and pressure-retaining connections without the need for custom modifications.
Material that holds up in the field
We use ASTM A193 B8—equivalent to SS 304 (UNS S30400)—which is the industry baseline for bolting in high-temperature and high-pressure applications. If you work with ASME Section VIII vessels, B31.3 piping, or API valve specs, you already know this material is the go-to for a reason.
We use ASTM A193 B8—equivalent to SS 304 (UNS S30400)—which is the industry baseline for bolting in high-temperature and high-pressure applications. If you work with ASME Section VIII vessels, B31.3 piping, or API valve specs, you already know this material is the go-to for a reason.
Key mechanicals for the B8 Class 1 condition:
- Tensile: 515 MPa (75 ksi) min.
- Yield: 205 MPa (30 ksi) min.
- Hardness: 192 HBW max.
- Corrosion resistance covers fresh water, mild chemical exposure, and general industrial atmospheres—so it handles routine service without unexpected pitting or stress corrosion cracking.
- Tensile: 515 MPa (75 ksi) min.
- Yield: 205 MPa (30 ksi) min.
- Hardness: 192 HBW max.
- Corrosion resistance covers fresh water, mild chemical exposure, and general industrial atmospheres—so it handles routine service without unexpected pitting or stress corrosion cracking.
Why the dual-thread layout works
Instead of a standard single-thread stud, this design uses right-hand threads on one end and left-hand threads on the other. That’s not a gimmick—it gives you three real-world advantages:
Instead of a standard single-thread stud, this design uses right-hand threads on one end and left-hand threads on the other. That’s not a gimmick—it gives you three real-world advantages:
- Vibration resistance – opposite threads counteract rotational loosening, which is a known headache on compressors, pumps, and engine connections.
- Even load distribution – the opposing thread paths share the clamping load more evenly across the flange or joint, so you don’t get localized overloading that leads to premature gasket or bolt failure.
- Easier installation and adjustment – when you need to rotate a component or fine‑tune alignment during assembly, the dual thread saves time and reduces the risk of cross-threading.
- Even load distribution – the opposing thread paths share the clamping load more evenly across the flange or joint, so you don’t get localized overloading that leads to premature gasket or bolt failure.
- Easier installation and adjustment – when you need to rotate a component or fine‑tune alignment during assembly, the dual thread saves time and reduces the risk of cross-threading.
Where it actually gets used
From what we see in the field, this thread stud shows up most often in:
- Oil & gas – flange joints, pipeline tie-ins, and pressure vessel manways where a leak-free seal is non‑negotiable.
- Power generation – turbine casings, boiler access doors, and steam piping where thermal cycling is constant.
- Chemical plants – equipment exposed to mild corrosives; the SS 304 composition gives you a decent service life without stepping up to costly 316 or duplex grades.
- General heavy industry – structural steel connections, gearbox mounts, and large rotating equipment that sees shock loading.
From what we see in the field, this thread stud shows up most often in:
- Oil & gas – flange joints, pipeline tie-ins, and pressure vessel manways where a leak-free seal is non‑negotiable.
- Power generation – turbine casings, boiler access doors, and steam piping where thermal cycling is constant.
- Chemical plants – equipment exposed to mild corrosives; the SS 304 composition gives you a decent service life without stepping up to costly 316 or duplex grades.
- General heavy industry – structural steel connections, gearbox mounts, and large rotating equipment that sees shock loading.
Quality side of things
Because we manufacture to ASME B18.31.2, every batch goes through dimensional checks, thread gauging, and hardness verification. No shortcuts. That’s why many **China suppliers** in the Jiaxing region have gained traction in export markets—not on price alone, but on traceability and repeatability. This stud is marked and documented so you can track it back to melt and heat treatment records if your project requires full NIST traceability.
Because we manufacture to ASME B18.31.2, every batch goes through dimensional checks, thread gauging, and hardness verification. No shortcuts. That’s why many **China suppliers** in the Jiaxing region have gained traction in export markets—not on price alone, but on traceability and repeatability. This stud is marked and documented so you can track it back to melt and heat treatment records if your project requires full NIST traceability.
Bottom line: if you need a dependable 3/4 IN thread stud that balances mechanical strength, corrosion resistance, and genuine ASME compliance—without over-engineering for exotic environments—this one is worth a closer look. It’s built to do the job, stay tight, and come off clean when maintenance calls.
Send Message
