Recommend Products
Name: Fujian Monel 400 Double End Stud Material: Monel 400 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: Resistant to hydrofluoric acidQS Fastener: Monel 400 Double End Stud
Name: Inconel 625 Double End Stud Material: Inconel 625 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 625 Double End Stud
Name: Xiamen Inconel 600 High Strength Fastener Material: Inconel 600 Standard: ASME Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 High Strength Fastener
Name: Inconel 600 Stud Bolt Putian Material: Inconel 600 Standard: ASME B18.2.1 Size: 5/16 to 4 inch Length: 30 to 1000 mm Class: 12.9 Feature: High Yield Strength, Durable Strength and Corrosion ResistanceQS Fastener: Inconel 600 Stud Bolt
B7 Bolts China Suppliers
QS Fastener: B7 Bolts China Suppliers
Name: B7 Bolts China Suppliers
Material: ASME A193 B7
Length: 90mm
Anti-corrosion Process: Xylan Coated Green
Size: 3/4 Inch
Standard: ANSI B18.31.2
Material: ASME A193 B7
Length: 90mm
Anti-corrosion Process: Xylan Coated Green
Size: 3/4 Inch
Standard: ANSI B18.31.2
Quantity
B7 Bolts from Trusted China Suppliers
When sourcing high-strength fasteners, B7 Bolts manufactured to ASME A193 / ASTM A193 standards are among the most reliable choices for critical bolting applications. These chromium-molybdenum steel bolts undergo a precise heat-treatment process—quenching and tempering—to achieve a minimum tensile strength of 125 ksi (860 MPa) and a yield strength of 105 ksi (725 MPa), ensuring robust performance under extreme pressure and temperature fluctuations.
When sourcing high-strength fasteners, B7 Bolts manufactured to ASME A193 / ASTM A193 standards are among the most reliable choices for critical bolting applications. These chromium-molybdenum steel bolts undergo a precise heat-treatment process—quenching and tempering—to achieve a minimum tensile strength of 125 ksi (860 MPa) and a yield strength of 105 ksi (725 MPa), ensuring robust performance under extreme pressure and temperature fluctuations.
The specific variant discussed here features a 3/4-inch nominal diameter and a 90mm overall length, conforming to ANSI B18.31.2 for heavy hex structural bolts. This length is particularly suitable for flanged connections, pressure vessels, and valve assemblies where sufficient thread engagement and clamp length are essential for joint integrity. The dimensional compliance guarantees interchangeability with standard nuts and washers, simplifying on-site installation and reducing the risk of mismatched components.
A standout feature of these fasteners is the green Xylan coated anti-corrosion finish. Unlike conventional zinc plating or hot-dip galvanizing, Xylan is a fluoropolymer-based coating that provides exceptional barrier protection against salt spray, humidity, hydrogen sulfide, and aggressive chemical media. The bright green color not only offers quick visual identification during maintenance inspections but also reduces galling during tightening—a common issue with untreated stainless or uncoated alloy steels. This coating retains its lubricity over a wide temperature range (-40°C to +260°C), making it ideal for offshore platforms, refinery piping, and geothermal power systems.
China Suppliers have become a major global source for these premium fasteners, offering competitive lead times and flexible customization without compromising material traceability or mechanical test reports. Reputable manufacturers in this region strictly follow ASME Section II and SA-193 requirements, with in-house hardness testing, proof load verification, and impact testing at low temperatures when specified. Many suppliers also provide third-party inspection services (e.g., SGS, BV, or TÜV) and full mill certification, ensuring that each batch meets the stringent demands of EPC contractors and maintenance engineers.
From a practical engineering standpoint, installing these B7 Bolts requires controlled torque values based on the Xylan's coefficient of friction (typically 0.08–0.12), which is lower than bare steel. This allows for more accurate preload using hydraulic tensioners or torque wrenches, reducing scatter in clamp force. For critical service, re-torquing after thermal cycling is recommended, as the coating maintains stable friction over multiple make-and-break cycles.
In summary, the combination of ASME A193 B7 material, 90mm length, 3/4-inch size, ANSI B18.31.2 geometry, and green Xylan coating delivers a balanced solution for high-pressure, corrosive, and safety-critical environments. When procured from qualified China Suppliers, these bolts offer a cost-effective yet fully traceable alternative to Western-made equivalents, with the added benefit of shorter supply chains and responsive technical support. Whether for new construction or turnaround maintenance, this fastener choice ensures long-term joint reliability, reduced unplanned downtime, and compliance with international engineering codes. Always verify the supplier's quality system and request lot-specific test certificates to confirm mechanical properties and coating thickness before dispatch.
Send Message
