Stainless Steel Seamless Pipe

QS Pipe: Zhejiang Stainless Steel Seamless Pipe

ASME B36.19M stainless steel seamless pipe, 1/8 to 30 inch SCH40S, for clean fluid transport and mechanical duties in chemical, food, medical and instrumentation plants.

Quantity

Contact Now

add to cart

One-Minute Overview

Stainless steel seamless pipe to ASME B36.19M in 1/8 to 30 inch sizes.
SCH40S wall covers typical small-bore and medium-bore process lines.
Seamless body keeps the bore smooth, with no weld bead inside the flow.
Specified for chemical, food, medical, instrumentation and industrial service.

Stainless steel seamless pipe is drawn or pierced without a weld, so the bore is a continuous surface with no bead to disturb the flow or trap product. This item follows ASME B36.19M, the dimension standard that governs stainless pipe, and covers 1/8 to 30 inch in SCH40S. Where a line carries chemicals, food, pharmaceutical or instrument fluids, the smooth bore and the absence of a heat-affected zone remove two of the usual places where deposits and corrosion start. The same tube also serves mechanical duties where corrosion resistance matters more than paint.

Name: Stainless Steel Seamless Pipe
Type: Seamless
Size: 1/8 to 30 Inch
Schedule: SCH40S
Material: Stainless Steel
Standard: ASME B36.19M
Application: Chemical, Food, Medical, Instrumentation and General Industrial Fluid Transport
Size, schedule and material are confirmed per inquiry, and a detailed specification sheet is available on request.

Grade selection starts with the fluid. Austenitic stainless covers most chemical, food and water duties; add molybdenum where chlorides are present, and keep carbon low where the line will be welded and then exposed to heat. SCH40S is the stainless wall series in ASME B36.19M and suits a wide band of process duty; read the wall from the standard rather than assuming SCH40 equals SCH40S. Bore finish matters for product lines, so specify the surface condition if the fluid is viscous or the clean-in-place regime is strict.

Fabrication keeps stainless clean: dedicated tools, clean benches, and consumables that match the grade. Cut square, bevel to the procedure, purge the root where the service demands it, and passivate the welds after welding if chlorides or washdown will meet the pipe. Support the spool so flange faces stay square, and keep carbon steel grit away from the finished surface. Inspection can include PMI on the material and NDT on the welds, both documented for the project file.

FAQ

Q1. Why order seamless for a stainless line instead of welded tube?

The bore. A welded tube carries a weld bead or a remnant of one, and in product or high-purity service that is where deposits and bacteria collect. Seamless gives a continuous surface and it also deletes the heat-affected zone, the usual suspect in intergranular corrosion.

Q2. Is SCH40S the same wall as SCH40?

Close cousins, not twins. SCH40S belongs to the stainless series in ASME B36.19M and does not map one to one onto every carbon steel SCH40 wall. Read the wall from the standard for the exact outside diameter, and size the pipe to the design code rather than to habit.

Q3. Can I just treat this like carbon steel pipe with a shiny finish?

You can, right up until the first chloride pit or the first iron contamination from a carbon steel grinder. Stainless wants clean tools, matched consumables and a little respect. Treat it well and it outlives the plant; treat it like black pipe and it will sulk.

Q4. How long will production take for stainless steel seamless pipe?

Standard sizes are typically ready within 30 days, and in-stock items ship immediately. Larger or custom orders get a confirmed date per order, because the schedule depends on quantity, material, the bolt pattern you specify, and how busy production is at the moment you order.

Send Message