SS Slip On Flange

QS Flange: Wenzhou SS Slip On Flange

ANSI B16.5 stainless steel slip on flange, 1/2 to 24 inch, 300LB with raised face, forged, attached to equipment or pipe by fillet weld.

Quantity

Contact Now

add to cart

One-Minute Overview

Stainless steel slip on flange, 1/2 to 24 inch, 300LB, raised face.
Forged to ANSI B16.5 dimensions for clean bolt-up with standard flanges.
Corrosion-resistant and environmentally friendly for long, low-maintenance service.
Slips over the pipe and is fixed by a fillet weld — no special tooling.

The SS slip on flange brings stainless steel corrosion resistance to the simplest flange joint on the site. Forged and dimensioned to ANSI B16.5, this series covers 1/2 to 24 inch in the 300LB class with a raised face. The flange slides over the pipe or onto an equipment nozzle and is secured by a fillet weld directly. The result is a corrosion-resistant, environmentally friendly joint that installs quickly and holds up in demanding media.

Name: SS Slip On Flange
Size: 1/2"-24"
Pressure: 300LB
Material: Stainless Steel
Flange Face: RF
Standard: ANSI B16.5

Slip on flanges earn their place on utility, process and outdoor lines where welders want speed and inspectors want access: two fillet welds, one inside the bore and one at the hub, and the joint is complete. Stainless steel construction shrugs off rust and staining, so the flange keeps its sealing face over years of service. Match size and 300LB class to the mating flange, pick a gasket for the media, and tighten in a star pattern to the recommended torque.

FAQ

Q1. Why pick stainless steel for a plain slip on flange?

Because rust never takes a day off. The forged stainless steel body resists corrosion and keeps the raised face clean, which protects the gasket and the seal over time. On water, chemical or outdoor lines that is the difference between a joint that lasts and one that needs constant attention.

Q2. What sizes and pressure classes does this series cover?

The series runs from 1/2 to 24 inch in the 300LB class, all with a raised face and forged construction to ANSI B16.5. Confirm the mating flange drilling and gasket style before ordering so the joint bolts up without adapters or surprises.

Q3. Two fillet welds and done — what could possibly go wrong?

Skipping one of them. A slip on flange needs the weld inside the bore and the weld around the hub; do both and the joint is solid. Also mind the fit-up: slip the flange on square, tack it, then weld, and you will wonder why anyone complicates this.

Q4. What is the typical lead time for these flanges?

Standard sizes are typically ready within 30 days, and in-stock items ship immediately. Larger or custom orders get a confirmed date per order, because the schedule depends on quantity, material, the bolt pattern you specify, and how busy production is at the moment you order.

Send Message