High-Temperature SMLS Pipe

QS Steel Pipe: Zhejiang High-temperature SMLS Pipe

API 5L X42 seamless pipe, 6 inch SCH 40 with bevelled ends and black surface, specified for elevated-temperature transport service.

Quantity

Contact Now

add to cart

One-Minute Overview

Seamless pipe in API 5L X42 steel, 6 inch SCH 40, for high-temperature service.
Bevelled ends arrive ready for butt weld fit-up on the line.
Normal black surface finish for easy field coating and inspection.
Carbon-manganese grade that balances toughness, weldability and moderate heat duty.

This high-temperature SMLS pipe pairs API 5L X42 steel with a 6 inch SCH40 seamless shell and bevelled ends. X42 is a carbon-manganese grade with more strength than plain carbon steel and the weldability that field crews want on transport lines. In elevated-temperature service it holds its mechanical properties through moderate heat duty — hot oil, gas and chemical transport where the operating window stays within the grade band. The seamless construction keeps the wall uniform around the circumference, and the bevelled ends arrive ready for butt weld fit-up.

Name: High-Temperature SMLS Pipe
Type: Seamless
Size: 6 Inch
Schedule: SCH 40
Material: API 5L X42
Standard: API 5L
End: Bevel End
Surface: Normal Black
Application: High-temperature service
Size and wall thickness are confirmed per inquiry, and a detailed specification sheet is available on request.

Temperature limits follow the grade. X42 is a carbon-manganese steel, so its standard service band is roughly -20°C to 450°C; within that window yield and tensile strength stay stable and the pipe behaves predictably. Long exposure at the top of the band brings slower effects — carbide precipitation and pearlite spheroidisation — that gradually cost toughness and creep resistance. Good practice is to design inside the band, monitor wall thickness on long-running lines, and plan inspection intervals according to how hot and how long the pipe actually runs.

Fabrication follows the bevels. The ends arrive cut to a weld preparation, so fit-up is a matter of alignment, tack welds and a qualified procedure with compatible consumables; no factory end cutting is needed on the line. Clean the black surface before field coating, check OD and wall at the ends when the bundle lands, and store the pipe capped and off the ground. Marked heat numbers let QA trace every length back to its mill test report.

FAQ

Q1. What temperature range can this X42 SMLS pipe handle?

As a carbon-manganese grade, X42 works in a standard band of roughly -20°C to 450°C, where its strength stays stable. Above that, or in long service at the top of the band, the microstructure evolves and creep resistance falls away. For hotter duties, alloy grades are the right move.

Q2. Why are the ends bevelled on this pipe?

So the welder can fit up and butt weld without cutting the prep on site. The bevel arrives machined and ready; align, tack and weld per your procedure. For a 6 inch SCH40 line that saves time on every joint and keeps the weld geometry consistent along the run.

Q3. What does long service at high heat do to carbon-manganese steel?

It ages the steel. Carbide precipitation and pearlite spheroidisation creep in over long exposure near the top of the service band, quietly reducing toughness and creep strength. Nothing dramatic on day one — which is exactly why inspection intervals and temperature logs matter on hot lines.

Q4. How long will production take?

Standard sizes are typically ready within 30 days, and in-stock items ship immediately. Larger or custom orders get a confirmed date per order, because the schedule depends on quantity, material, the bolt pattern you specify, and how busy production is at the moment you order.

Send Message