Recommend Products
Name: Xiamen Neoprene Isolation Gasket Standard: ASME B16.21 Material: Neoprene Size: 3 Inch Pressure: 150LB Type: Full Face Application: For Chemical and Corrosion Resistance Customized Service: YesQS Gasket: Xiamen Neoprene Isolation Gasket
Name: Zhejiang Gylon 3500 Insulating Gasket Set Material: Gylon 3500 Size: 4 Inch Pressure: 150# Thickness: 1/8" Type: F Sleeves: G11 Washers: G11 + ZPS Standard: For ASME B16.5 Flange Price: 65 - 85 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Gylon 3500 Insulating Gasket Set
Name: Xiamen Phenolic insulation Gasket Set Material: Phenolic Size: 8 Inch, RX50 Pressure: 5000 psi Type: D Sleeve: Mylar Washers: Phenolic+ ZPS Standard: For API 6A Flange Price: 199 - 249 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Xiamen Phenolic insulation Gasket Set
Name: Xiamen 40inch Gasket Insulation Sets Material: UNIFLUOR-7551 Size: 40 Inch Pressure: 150# Thickness: 1/8" Type: F Sleeve: G11 Washers: G11+ ZPS Standard: For ASME B16.47B-WN-RF Price: 1250 - 1450 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Xiamen 40inch Gasket Insulation Sets
Gylon3500 Dielectric Gasket Chinese Supplier
QS Gasket: Gylon3500 Dielectric Gasket Chinese Supplier
Name: Gylon3500 Dielectric Gasket Chinese Supplier
Standard: ASME B16.5
Material: Gylon 3500
Temperature: -268℃ to 260℃
Size: 16 Inch
Pressure: 150LB
Complete Set: with G10 Sleeve and Washers and ZPS
Compound: with High-performance modified polytetrafluoroethylene
Price: USD 469 - 599/ Set
MOQ: 1 Set
Customization: yes
Delivery time: 7-15 Day
Standard: ASME B16.5
Material: Gylon 3500
Temperature: -268℃ to 260℃
Size: 16 Inch
Pressure: 150LB
Complete Set: with G10 Sleeve and Washers and ZPS
Compound: with High-performance modified polytetrafluoroethylene
Price: USD 469 - 599/ Set
MOQ: 1 Set
Customization: yes
Delivery time: 7-15 Day
Quantity
As a senior insulation gasket engineer, I’ve evaluated countless dielectric sealing products across demanding operational environments. The Gylon3500 Dielectric Gasket stands out as a proven solution that bridges the gap between reliable electrical insulation and aggressive chemical resistance. This modified PTFE-based gasket, reinforced with silica through a proprietary manufacturing process, directly addresses the two perennial failure modes of conventional PTFE: cold flow and creep relaxation. The result is a stable, long-service-life seal that maintains bolt load integrity even under thermal cycling from -268°C to 260°C.
When sourcing this grade, selecting a reliable Gylon3500 Dielectric Gasket Chinese Supplier is critical—not all suppliers control the expanded PTFE microstructure that gives Gylon 3500 its low permeability and ionic purity. A qualified supplier will provide full traceability, ASME B16.5 dimensional compliance for 16-inch 150LB flanges, and complete kits including G10 insulating sleeves, washers, and ZPS anti-friction washers to optimize torque retention.
In semiconductor fabs, this gasket prevents trace-metal contamination in etch and deposition chambers, where ultrapure water and aggressive gases demand near-zero outgassing. In chemical processing, it resists virtually all strong acids, caustics, and oxidizers—making it the go-to choice for reactor flanges, pump seals, and valve connections that also require cathodic protection isolation. The power sector relies on it for electrolyzer stacks and fuel cell balance-of-plant sealing, where dielectric strength prevents stray current corrosion. Aerospace engineers specify it for hydraulic and fuel systems because of its lightweight construction and resistance to ozone and UV degradation.
Compared to ceramic or rubber alternatives, the Gylon3500 Dielectric Gasket offers easier installation, conformability to flange surface irregularities, and a safety margin against gasket blowout. With a price range of USD 469–599 per set, MOQ of just one set, and 7–15 day delivery, it lowers the barrier for both pilot trials and emergency maintenance. Customization in thickness, I.D./O.D., and bolt-hole patterns is readily available. For any engineer specifying dielectric flange isolation under cryogenic to medium-high temperatures, this gasket eliminates the trade-off between sealing efficiency and electrical performance—delivering both in a single, field-proven package.
FAQ
Q1: Can Gylon3500 Dielectric Gasket be used with hydrofluoric acid?
A: Yes, it resists dilute hydrofluoric acid, but concentrated HF requires caution—confirm with the supplier for specific concentration and temperature limits.
Q1: Can Gylon3500 Dielectric Gasket be used with hydrofluoric acid?
A: Yes, it resists dilute hydrofluoric acid, but concentrated HF requires caution—confirm with the supplier for specific concentration and temperature limits.
Q2: Is the G10 sleeve included in the complete set compatible with 316L stainless steel flanges?
A: Absolutely. G10 is a glass-epoxy composite that pairs well with 316L, providing excellent galvanic isolation without galling.
A: Absolutely. G10 is a glass-epoxy composite that pairs well with 316L, providing excellent galvanic isolation without galling.
Q3: How does the ZPS washer improve bolting performance?
A: ZPS (anti-friction) washers reduce friction under the nut, ensuring more accurate torque application and better long-term gasket stress retention.
A: ZPS (anti-friction) washers reduce friction under the nut, ensuring more accurate torque application and better long-term gasket stress retention.
Q4: What is the shelf life of this gasket if stored properly?
A: Indefinite under dry, indoor conditions (15–30°C), away from UV and ozone sources—no age-related degradation occurs.
A: Indefinite under dry, indoor conditions (15–30°C), away from UV and ozone sources—no age-related degradation occurs.
Send Message
