Gylon 3500 Gasket 32 Inch

QS Gasket: Gylon3500 Gasket China Sourcing Partner

Gylon 3500 Gasket to ASME B16.5 150LB, supplied with G10 sleeves, washers and ZPS.

Quantity

Contact Now

add to cart

One-Minute Overview

Gylon 3500 Gasket is specified for ASME B16.5 150LB flanges.
A Gylon 3500 element and G10 sleeves and washers with ZPS form the complete insulating stack.
The 32 Inch format matches the listed flange bore and bolt circle.
Final dimensions and the flange drawing are confirmed per inquiry.

Selecting an isolation kit starts with the flange standard, not the product name. Gylon 3500 Gasket is listed for ASME B16.5 flanges at 150LB, built on Gylon 3500 with G10 sleeves, washers and ZPS and sized for 32 Inch. Qishine specifies the assembly as a matched set so the sealing and insulating functions share one part number.

Name: Gylon 3500 Gasket 32 Inch
Material: Gylon 3500
Compound: modified PTFE compound
Standard: ASME B16.5
Size: 32 Inch
Pressure: 150LB
Complete with: G10 sleeves and washers with ZPS
Note: Full dimensions and bolt pattern are confirmed per inquiry.

Fix the ASME B16.5 standard and 150LB class, then the facing and bolt size. Only then choose the Gylon 3500 grade and the 32 Inch bore. Confirm that the gasket configuration matches the flange drawing and that the G10 sleeves and washers with ZPS stack height is compatible with the available grip length.

Dry-fit the stack before final assembly to check bore clearance and sleeve length. Clean the faces, tighten in a cross pattern to the specified torque, and record the as-built stack height. After the first heat-up, recheck torque and verify electrical discontinuity across the joint.

FAQ

Q1. Which standard does this kit follow?

It is listed for ASME B16.5 flanges in the 150LB class. The exact facing, bolt grade and bore are confirmed per inquiry against the flange drawing before the 32 Inch gasket is cut.

Q2. What determines the correct 32 Inch gasket size?

The nominal pipe size, the ASME B16.5 flange bore and the bolt circle. The gasket must seal the facing without protruding into the flow path, so the drawing is checked before cutting.

Q3. Can the insulating parts be ordered separately?

G10 sleeves and washers with ZPS are supplied as a matched set with the Gylon 3500 element to keep stack height and dielectric strength consistent. Separate items and exact dimensions are confirmed per inquiry.

Q4. How long will production take?

Standard sizes are typically ready within 30 days, and in-stock items ship immediately. Larger or custom orders get a confirmed date per order, because the schedule depends on quantity, material, the bolt pattern you specify, and how busy production is at the moment you order.

Send Message