Recommend Products
Name: Xiamen Neoprene Isolation Gasket Standard: ASME B16.21 Material: Neoprene Size: 3 Inch Pressure: 150LB Type: Full Face Application: For Chemical and Corrosion Resistance Customized Service: YesQS Gasket: Xiamen Neoprene Isolation Gasket
Name: Zhejiang Gylon 3500 Insulating Gasket Set Material: Gylon 3500 Size: 4 Inch Pressure: 150# Thickness: 1/8" Type: F Sleeves: G11 Washers: G11 + ZPS Standard: For ASME B16.5 Flange Price: 65 - 85 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Gylon 3500 Insulating Gasket Set
Name: Xiamen Phenolic insulation Gasket Set Material: Phenolic Size: 8 Inch, RX50 Pressure: 5000 psi Type: D Sleeve: Mylar Washers: Phenolic+ ZPS Standard: For API 6A Flange Price: 199 - 249 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Xiamen Phenolic insulation Gasket Set
Name: Xiamen 40inch Gasket Insulation Sets Material: UNIFLUOR-7551 Size: 40 Inch Pressure: 150# Thickness: 1/8" Type: F Sleeve: G11 Washers: G11+ ZPS Standard: For ASME B16.47B-WN-RF Price: 1250 - 1450 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Xiamen 40inch Gasket Insulation Sets
C4430 Gasket China Sourcing Partner
QS Gasket: C4430 Gasket China Sourcing Partner
Name: C4430 Gasket China Sourcing Partner
Standard: ASME B16.5
Material: Klingersil C4430
Compound: with Aramid Fiber Reinforced with a Nitrile Binder
Size: 4 Inch
Pressure: 150LB
Complete Set: with G10 Sleeve and Washers and ZPS
Price: USD 9.9-19.9/ Set
MOQ: 10 Set
Customization: yes
Delivery time: 7-15 Day
Standard: ASME B16.5
Material: Klingersil C4430
Compound: with Aramid Fiber Reinforced with a Nitrile Binder
Size: 4 Inch
Pressure: 150LB
Complete Set: with G10 Sleeve and Washers and ZPS
Price: USD 9.9-19.9/ Set
MOQ: 10 Set
Customization: yes
Delivery time: 7-15 Day
Quantity
As a senior gasket engineer, I often tell procurement teams that specifying the right material is only half the battle—the real leverage comes from how you configure, source, and scale it. The C4430 Gasket (Klingersil C-4430, aramid fiber with nitrile binder) is our go-to for oil-resistant, electrically isolating flange seals under ASME B16.5. For a 4"150LB set, complete with G10 sleeve, insulating washer, and ZPS steel washer, you are looking at a competitive $9.9–19.9/set range at 10-set MOQ, with 7–15 day delivery and full customization.
However, the true value of a China Sourcing Partner lies not in a single SKU, but in the flexibility of forms and sizes. We move beyond flat sheets (1.5×2m, 1.5×4m, 2×2m; or rolls 1.5m×10–20m for auto-punching) into die-cut (±0.2mm tolerance, DN≤600, one-stroke economy), water-jet/laser (no tooling, ideal for DN≥700 or odd shapes), and insert-reinforced types (C-4438 wire mesh for Class≥600; C-4439 expanded metal for >300°C blow-out prevention). For heat exchangers and valve bonnets, we apply metal-composite facings; for offshore skids and FPSOs, we deliver full insulating kits (G10/G11 sleeves + phenolic/nylon washers + galvanized steel washers) to kill galvanic corrosion.
Size coverage spans ASME B16.5 (NPS ½–24"), B16.47 (26–60"), and EN/DIN up to DN 4000. Stock thicknesses: 0.5, 1.0, 1.5, 2.0, 3.0mm (0.25–4mm on request). I.D. = bore + 2–3mm to prevent edge erosion; O.D. follows standard RF/FF dimensions. For odd ports (oval, obround, manways, pump splits), we CAD-waterjet in one step; for multi-pass heat-exchanger tube sheets, zone-drilled patterns hold ±0.1mm hole accuracy.
Quick selection: (1) flange standard → O.D. and bolt circle; (2) design pressure → thickness + insert per table (e.g., Class 150–300: 1.5mm, no insert, 250°C; Class 600–900: 1.0mm + C-4438, 300°C; Class 1500–2500: 0.5–1.0mm + C-4439, 350°C); (3) oil/hydrocarbon medium → choose C4430; if isolation needed → add insulating set; (4) qty≥200 → die-cut; <50 → water-jet; emergency → cut from 1.5mm sheet stock. A field engineer can generate a part number in five minutes—e.g.,"C4430 Gasket-FF-4"-150LB-1.5-G10"—send that string to your China Sourcing Partner, and you get an immediate price and lead-time, eliminating back-and-forth dimension checks.
FAQ
Q1: What is the maximum continuous operating temperature for C4430 Gasket without reinforcement?
A: 250°C for Class 150–300; with C-4438 wire mesh, it reaches 300°C; with C-4439 expanded metal, up to 350°C.
Q1: What is the maximum continuous operating temperature for C4430 Gasket without reinforcement?
A: 250°C for Class 150–300; with C-4438 wire mesh, it reaches 300°C; with C-4439 expanded metal, up to 350°C.
Q2: Can I use C4430 Gasket for steam service above 300°C?
A: Yes, but only with C-4439 expanded-metal insert and thickness reduced to 0.5–1.0mm; otherwise, the nitrile binder degrades.
A: Yes, but only with C-4439 expanded-metal insert and thickness reduced to 0.5–1.0mm; otherwise, the nitrile binder degrades.
Q3: How do I specify the correct inside diameter for a C4430 Gasket?
A: Use I.D. = pipe bore + 2–3mm. This prevents fluid erosion of the aramid fibers at the gasket inner edge.
A: Use I.D. = pipe bore + 2–3mm. This prevents fluid erosion of the aramid fibers at the gasket inner edge.
Q4: Does your China sourcing partner offer tooling-free samples?
A: Yes. For quantities under 50 sets, water-jet cutting requires no die charge, so samples are economical and fast.
A: Yes. For quantities under 50 sets, water-jet cutting requires no die charge, so samples are economical and fast.
Q5: Are insulating kits mandatory with C4430 Gasket on offshore platforms?
A: Not mandatory, but highly recommended. The G10 sleeve + insulating washer + ZPS steel washer block galvanic corrosion between dissimilar flanges.
A: Not mandatory, but highly recommended. The G10 sleeve + insulating washer + ZPS steel washer block galvanic corrosion between dissimilar flanges.
Send Message
