Butt Weld Equal Tee

QS Pipe Fitting: Fujian Butt Weld Equal Tee

Seamless 8 Inch SCH160 equal tee in carbon steel A234 WPB, built to ANSI B16.9 for butt welded branch connections in industrial piping.

Quantity

Contact Now

add to cart

One-Minute Overview

Seamless equal tee in carbon steel A234 WPB, size 8 Inch, schedule SCH160.
Built to ANSI B16.9 for a straight run and a same-diameter branch.
Bevelled ends join the pipe with a strong, leak-proof butt weld.
Used wherever flow has to be split or combined in a piping header.

A butt weld equal tee joins three pipes of the same diameter at a T-shaped intersection: a straight portion called the run and a perpendicular portion called the branch. This one is a seamless 8 Inch fitting in schedule SCH160, made from carbon steel A234 WPB and built to ANSI B16.9. The ends are bevelled so the tee and the pipe form a V-shaped groove, and the joint is made by melting the metal and letting it solidify, which gives a strong, leak-proof connection with no threaded or socketed weak point. Equal tees of this kind redirect or combine flow in industrial piping systems where the three legs all carry the same nominal size.

Name: Butt Weld Equal Tee
Type: Seamless, equal
Size: 8 Inch
Schedule: SCH160
Material: Carbon Steel A234 WPB
Standard: ANSI B16.9
End: Bevelled for butt welding
Sizes, wall thicknesses and schedules are confirmed per inquiry, and a detailed specification sheet is available on request.

Selecting an equal tee starts with the three things the spool drawing fixes: diameter, schedule and material. All three legs are the same nominal size here, so the 8 Inch bore runs straight through and the branch leaves at ninety degrees. SCH160 is a heavy wall, chosen when the line pressure or the corrosion allowance leaves little margin, and it has to match the pipe it joins - welding a heavy tee into a lighter run just moves the weak point to the weld. A234 WPB carbon steel is the standard butt weld fitting material for this kind of duty, with the strength to hold pressure and the weldability a field joint needs. Check the operating temperature, pressure and fluid before you sign off the class.

Fit-up decides how good the weld will be. Cut the pipe square, bevel both ends to the angle in the welding procedure, and hold the root gap evenly around the circumference so the branch does not pull the run out of alignment. Tack the tee in position, check the branch is square to the run, then weld with a qualified procedure and filler matched to A234 WPB. On a heavy SCH160 wall that means more passes and controlled interpass temperature, so plan the heat input rather than rushing the cap. Once the joint cools, inspect the bead profile and, where the design code asks for it, add radiographic or ultrasonic examination. Keep the bores clean and protected so nothing is left inside the header.

FAQ

Q1. Why choose an equal tee instead of a reducing one?

Because all three outlets carry the same nominal diameter. An equal tee keeps the bore constant through the run and the branch, which suits headers where a full-size take-off feeds another full-size line. A reducing tee steps the branch down in the same fitting; use that only when the branch really is smaller, since it adds a permanent restriction you did not ask for.

Q2. SCH160 sounds heavy - do I really need that wall?

You need it when the design says so. SCH160 is a thick schedule for high-pressure or thin-margin service, and it only helps if the run pipe is the same weight; mixing a heavy tee into a light line simply relocates the weak spot to the weld. If your line is SCH40 or SCH80, order the tee to match and save the weight and the welding time.

Q3. Can I skip the bevel and just pile weld on top?

Not on a fitting that is literally named for its weld. The butt weld joint needs a clean bevelled end so the filler metal can fuse the full wall thickness; a square-cut pipe with a fillet piled on top leaves a crevice and a stress raiser that a hydrotest tends to find. Cut the bevel, mind the root gap, and let the qualified procedure do its job.

Q4. What's the minimum I can order?

Standard flange insulation gasket kits start at one set, and standard gaskets, studs, washers and sleeves start at one piece. Kits made to your drawing or for a non-standard bolt pattern are quoted individually, because the minimum really depends on the material and the tooling involved.

Send Message