Recommend Products
Name: Xiamen Stainless Steel Flange Material: Stainless Steel Standard: ANSI B16.5 Size: 1/2 to 24 Inch Pressure: 150LB to 2500LB Process Method: Forged Type: SO/ WN/ BL Usage: Used in the Fields of Construction, Chemical Engineering, Petroleum and Natural Gas.QS Flange: Xiamen Stainless Steel Flange
Name: Butt Weld Flange Standard: ASME B16.5 Material: Carbon Steel Pressure: 150LB to 2500LB Size: 1/2 to 24 Inch Process Method: Forged Face: RF Usage: Used in the Fields of Construction, Chemical Engineering, Petroleum and Natural Gas.QS Flange: Butt Weld Flange
Name: Pipe Floor Flange Material: Carbon Steel Standard: ASME B16.5 Pressure: 150LB to 2500LB Size: 1/2 to 24 Inch Process Method: Forged Face: RF Usage: Commonly Used in Water Systems, Oil and Gas pipelinesQS Flange: Pipe Floor Flange
Name: ASME B16.5 Blank Flange Type: BL Face: RF Standard: ASME B16.5 Process Method: Forged Material: Carbon Steel Pressure: 150LB Size: 1/2 to 24 Inch Usage: Commonly Used in Water Systems, Oil and Gas pipelinesQS Flange: ASME B16.5 Blank Flange
Blind Flange China Suppliers
QS Flange: Blind Flange China Suppliers
Name: Blind Flange China Suppliers
Material: Stainless Steel
Type: BL
Face: RF
Class: 150 to 2500 LB
Size: 1/2 to 24 Inch
Feature: High Corrosion-resistant and Environmentally Friendly
Standard: ANSI B16.5
Process Method: Forged
Usage: The end of the pipeline is blocked or temporarily blocked
Material: Stainless Steel
Type: BL
Face: RF
Class: 150 to 2500 LB
Size: 1/2 to 24 Inch
Feature: High Corrosion-resistant and Environmentally Friendly
Standard: ANSI B16.5
Process Method: Forged
Usage: The end of the pipeline is blocked or temporarily blocked
Quantity
When pipeline integrity demands absolute closure, the stainless steel blind flange stands as a first-line component for permanent or temporary end sealing. As a professional engineer working with industrial piping systems, I have specified and tested countless flanges across refineries, offshore platforms, and chemical plants. Among them, the forged BL type with raised face (RF) remains the most practical, reliable, and cost-effective choice – especially when sourced from established China suppliers who combine material traceability with rigorous dimensional control.
Material & Manufacturing Standards
This blind flange is forged from high-grade stainless steel, fully compliant with ANSI B16.5. The forging process refines grain structure, eliminates porosity, and delivers superior mechanical strength compared to cast alternatives. Available in Class 150 through 2500 LB, and sizes ½ to 24 inches, it covers the full spectrum of petrochemical, power generation, and marine applications. The RF sealing surface ensures tight joint compression when mated with corresponding gaskets, reducing leak paths even under fluctuating thermal and pressure cycles.
This blind flange is forged from high-grade stainless steel, fully compliant with ANSI B16.5. The forging process refines grain structure, eliminates porosity, and delivers superior mechanical strength compared to cast alternatives. Available in Class 150 through 2500 LB, and sizes ½ to 24 inches, it covers the full spectrum of petrochemical, power generation, and marine applications. The RF sealing surface ensures tight joint compression when mated with corresponding gaskets, reducing leak paths even under fluctuating thermal and pressure cycles.
Corrosion Resistance & Environmental Compliance
The chromium-nickel alloy content provides outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking – essential for sour gas, seawater cooling, and food-grade steam lines. The material is fully recyclable and contains no hazardous coatings, meeting modern environmental standards for industrial components. For offshore or coastal installations, this blind flange significantly outlasts carbon steel equivalents, lowering life-cycle maintenance costs.
The chromium-nickel alloy content provides outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking – essential for sour gas, seawater cooling, and food-grade steam lines. The material is fully recyclable and contains no hazardous coatings, meeting modern environmental standards for industrial components. For offshore or coastal installations, this blind flange significantly outlasts carbon steel equivalents, lowering life-cycle maintenance costs.
High-Temperature Performance – Up to 800°C
What sets this BL flange apart is its stable performance across extreme temperatures. Through solution annealing and controlled forging, it retains oxidation resistance and creep strength from cryogenic conditions up to 800°C. In practical terms, I have used similar flanges on superheated steam headers (550°C), reformer outlet lines (750°C), and heat-exchanger channels where thermal shock is routine. The alloy forms a dense oxide layer that slows further scaling, while mechanical properties – tensile strength, hardness, and impact toughness – remain well within ASTM/ASME allowable limits. Thermal stress is mitigated by the flange’s robust hub-less design, reducing distortion and gasket relaxation during rapid start-ups or shutdowns.
What sets this BL flange apart is its stable performance across extreme temperatures. Through solution annealing and controlled forging, it retains oxidation resistance and creep strength from cryogenic conditions up to 800°C. In practical terms, I have used similar flanges on superheated steam headers (550°C), reformer outlet lines (750°C), and heat-exchanger channels where thermal shock is routine. The alloy forms a dense oxide layer that slows further scaling, while mechanical properties – tensile strength, hardness, and impact toughness – remain well within ASTM/ASME allowable limits. Thermal stress is mitigated by the flange’s robust hub-less design, reducing distortion and gasket relaxation during rapid start-ups or shutdowns.
Application Scenarios
- Chemical processing: Isolating reactor sections for catalyst replacement.
- Oil & gas: Blocking pig launcher/receiver ends or temporarily sealing wellhead flow lines.
- Power plants: Closing turbine extraction pipes during maintenance.
- Marine: Sealing ballast and firewater system blind ends.
- Food & pharmaceutical: Providing sanitary dead-end closures with easy cleaning access.
- Chemical processing: Isolating reactor sections for catalyst replacement.
- Oil & gas: Blocking pig launcher/receiver ends or temporarily sealing wellhead flow lines.
- Power plants: Closing turbine extraction pipes during maintenance.
- Marine: Sealing ballast and firewater system blind ends.
- Food & pharmaceutical: Providing sanitary dead-end closures with easy cleaning access.
Quality Assurance from China Suppliers
Reputable China suppliers now deliver flanges with full mill test certificates, PMI confirmation, and dimensional inspection per ASME B16.5. Many offer short lead times and competitive pricing without sacrificing traceability – a critical factor for international EPC projects. When selecting a partner, I always verify their NDE capabilities (UT/MT) and heat-treatment records, which directly affect high-temperature reliability.
Reputable China suppliers now deliver flanges with full mill test certificates, PMI confirmation, and dimensional inspection per ASME B16.5. Many offer short lead times and competitive pricing without sacrificing traceability – a critical factor for international EPC projects. When selecting a partner, I always verify their NDE capabilities (UT/MT) and heat-treatment records, which directly affect high-temperature reliability.
Conclusion
The stainless steel BL RF blind flange is more than a simple plate – it is a safety barrier, a maintenance enabler, and a longevity asset. With pressure ratings up to 2500 LB, size flexibility, and proven endurance at 800°C, it meets the most demanding industrial challenges. Sourcing from reliable China suppliers adds commercial efficiency while maintaining technical integrity. For engineers specifying pipeline closures, this flange offers the right balance of strength, corrosion resistance, and thermal stability – ensuring system safety from commissioning to decommissioning.
The stainless steel BL RF blind flange is more than a simple plate – it is a safety barrier, a maintenance enabler, and a longevity asset. With pressure ratings up to 2500 LB, size flexibility, and proven endurance at 800°C, it meets the most demanding industrial challenges. Sourcing from reliable China suppliers adds commercial efficiency while maintaining technical integrity. For engineers specifying pipeline closures, this flange offers the right balance of strength, corrosion resistance, and thermal stability – ensuring system safety from commissioning to decommissioning.
Send Message
