ASTM TP304L Pipe

QS Pipe: Huaian ASTM TP304L Pipe

ASTM TP304L welded stainless pipe, 1/2 to 30 inch and 4 m lengths, STD wall for heavily welded assemblies needing weld zone corrosion resistance.

Quantity

Contact Now

add to cart

One-Minute Overview

ASTM TP304L welded pipe, 1/2 to 30 inch, STD wall, 4 m plain end lengths.
Low carbon 304L stainless for welded assemblies without weld zone decay.
Corrosion resistant across the range from small process lines to mains.
Seam tested before dispatch, end caps protecting plain ends in transit.

TP304L answers the question every welder asks about 304: what happens to the steel in the heat affected zone? The L means low carbon, which keeps chromium from forming carbides along the grain boundaries during welding — the sensitisation that later opens the door to intergranular corrosion. This A312 welded pipe runs TP304L across 1/2 to 30 inch in standard wall with 4 m plain end lengths, a shop-friendly format for spools and modules where welding is part of the job, not an exception.

Name: ASTM TP304L Pipe
Type: Welded
Size: 1/2 to 30 Inch
Material: TP304L
Standard: ASTM
Thickness: STD
Length: 4 m
End: Plain
Feature: Corrosion Resistance

Choosing the low carbon grade is really choosing a fabrication strategy. Where a run will be welded heavily — long field seams, repeated tie-ins, skids that get modified — 304L buys insurance: no solution annealing needed after welding for most services, and the weld zone keeps the same corrosion story as the parent metal. The usual stainless rules still apply. Use matching low carbon consumables, keep heat input sane, clean the joint of grease and iron contamination, and let the passive layer do its work; passivation remains available where the service calls for it. In chloride-heavy environments the conversation moves to molybdenum grades instead.

The 4 m lengths suit fabrication shops and compact layouts, cutting down on handling while keeping field joints manageable. Caps stay on until fit-up, and cut pieces follow the spool drawing so the traceability chain holds. Size and wall thickness are confirmed per inquiry, and a detailed specification sheet is available on request.

FAQ

Q1. What does the L in TP304L actually change?

It lowers the carbon content so chromium carbides cannot line up along grain boundaries during welding. Without that carbide network the weld zone resists intergranular corrosion the same way the parent metal does, which is why 304L is the default when a lot of welding is planned.

Q2. Do I still need solution annealing after welding?

For most services, no — that is the point of the low carbon grade. Heavy sections or unusually aggressive media can still warrant a solution anneal, but ordinary water, oil and process duty is exactly what 304L welds are built for. Confirm against your service when in doubt.

Q3. Is 304L weaker than regular 304?

Mechanically the two are effectively twins; the difference is carbon, not strength. You give up nothing on pressure carrying and gain weld zone corrosion resistance. If chloride pitting is the real threat, move to a molybdenum grade instead of trading toughness for nothing.

Q4. How long will production take for TP304L pipe?

Standard sizes are typically ready within 30 days, and in-stock items ship immediately. Larger or custom orders get a confirmed date per order, because the schedule depends on quantity, material, the bolt pattern you specify, and how busy production is at the moment you order.

Send Message