API 5L Welded Pipes

QS Pipe: Fujian API 5L Welded Pipes

API 5L Gr.B welded line pipe, 8 inch SCH40 in 6 m plain end lengths, seam tested for petroleum transmission and gathering lines.

Quantity

Contact Now

add to cart

One-Minute Overview

API 5L welded line pipes, Grade B, 8 inch size in SCH40 wall and 6 m lengths.
Plain ends and a normal black surface ready for field girth welding.
Weld seam inspected and each length hydrostatically tested before shipment.
Gr.B chemistry and strength for petroleum transmission and gathering lines.

This API 5L welded pipe is line pipe in the true sense: Grade B steel, 8 inch SCH40, 6 m lengths with plain ends and a normal black surface. API 5L is the specification that defines line pipe for the petroleum and natural gas industries, covering chemistry, mechanical properties, testing and delivery condition in one document. An 8 inch run is a transmission or gathering line rather than a plant tie-in, so consistency between lengths matters as much as the numbers on any single piece.

Name: API 5L Welded Pipes
Type: Welded
Size: 8 Inch
Material: API 5L Gr.B
Standard: API 5L
Thickness: SCH40
Length: 6 m
End: Plain
Surface: Normal Black

Welded line pipe puts the weld seam at the centre of quality. The longitudinal seam is made under controlled parameters and then examined by non-destructive testing at the level the order calls for, while every length takes a hydrostatic test to prove the pipe holds pressure as a whole. Grade B is the workhorse chemistry of the API 5L family — strong enough for most transmission duty, weldable without ceremony, and widely recognised by pipeline specifications. The normal black surface is a protective finish for transport and storage; it is not a coating system for buried service, so the line coating is applied separately after inspection.

Field joining is where API 5L earns its reputation. Plain ends are prepared to the qualified girth weld procedure, fit-up is checked with line-up clamps before the root pass, and welders work to the same acceptance criteria used in the mill. Keep the end caps on through shipping and staging so bevels stay clean, and store bundles on level ground to keep long lengths from bowing. Size and wall thickness are confirmed per inquiry, and a detailed specification sheet is available on request.

FAQ

Q1. What does Grade B mean inside API 5L?

Grade B is the standard strength level of the API 5L family, with defined yield and tensile values plus chemistry limits on carbon, manganese and residuals. It covers most gathering and transmission duty, welds without special consumables in normal field conditions, and is the grade most pipeline specifications list as the baseline.

Q2. How is the weld seam actually tested on line pipe?

The seam is examined by non-destructive testing — ultrasonic or electromagnetic methods are typical — at the level the order specifies, and every length is hydrostatically tested to a set stress level. Together those two checks cover what a leak could exploit: a local weld imperfection and a general weakness in the pipe body.

Q3. Is the black finish enough for buried service?

No. The normal black surface is a mill finish that protects the pipe in transit and storage, not a corrosion barrier for soil. Buried line pipe gets an external coating system and often cathodic protection on top of it, applied after the pipe passes inspection and before it goes in the trench.

Q4. What is the minimum order for API 5L line pipe?

Standard flange insulation gasket kits start at one set, and standard gaskets, studs, washers and sleeves start at one piece. Kits made to your drawing or for a non-standard bolt pattern are quoted individually, because the minimum really depends on the material and the tooling involved.

Send Message