Recommend Products
Name: Xiamen Neoprene Isolation Gasket Standard: ASME B16.21 Material: Neoprene Size: 3 Inch Pressure: 150LB Type: Full Face Application: For Chemical and Corrosion Resistance Customized Service: YesQS Gasket: Xiamen Neoprene Isolation Gasket
Name: Zhejiang Gylon 3500 Insulating Gasket Set Material: Gylon 3500 Size: 4 Inch Pressure: 150# Thickness: 1/8" Type: F Sleeves: G11 Washers: G11 + ZPS Standard: For ASME B16.5 Flange Price: 65 - 85 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Gylon 3500 Insulating Gasket Set
Name: Xiamen Phenolic insulation Gasket Set Material: Phenolic Size: 8 Inch, RX50 Pressure: 5000 psi Type: D Sleeve: Mylar Washers: Phenolic+ ZPS Standard: For API 6A Flange Price: 199 - 249 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Xiamen Phenolic insulation Gasket Set
Name: Xiamen 40inch Gasket Insulation Sets Material: UNIFLUOR-7551 Size: 40 Inch Pressure: 150# Thickness: 1/8" Type: F Sleeve: G11 Washers: G11+ ZPS Standard: For ASME B16.47B-WN-RF Price: 1250 - 1450 USD MOQ: 1 PCS Delivery Date: 7 - 35 Days Customization: YesQS Gasket: Xiamen 40inch Gasket Insulation Sets
Klingersil C4430 Gasket Chinese Supplier
QS Gasket: Klingersil C4430 Gasket Chinese Supplier
Name: Klingersil C4430 Gasket Chinese Supplier
Standard: ASME B16.5
Material: Klingersil C4430
Max Temperature: 400℃
Size: 2 Inch
Pressure: 150LB
Complete Set: with G10 Sleeve and Washers and ZPS
Price: USD 9.9/ Set
MOQ: 10 Sets
Customization: yes
Delivery time: 7-30 Day
Compound: with Aramid Fiber Reinforced with a Nitrile Binder
Standard: ASME B16.5
Material: Klingersil C4430
Max Temperature: 400℃
Size: 2 Inch
Pressure: 150LB
Complete Set: with G10 Sleeve and Washers and ZPS
Price: USD 9.9/ Set
MOQ: 10 Sets
Customization: yes
Delivery time: 7-30 Day
Compound: with Aramid Fiber Reinforced with a Nitrile Binder
Quantity
When specifying a Klingersil C4430 Gasket for ASME B16.5 Class 150 flanges, the material composition is what truly determines service life. This 2‑inch, 400 °C‑rated non‑asbestos gasket relies on a tri‑phase matrix: aramid fibers provide the tensile backbone—think of them as microscopic rebar that prevents blowout under 50 MPa bolt load, with only 8 % compression and 55 % rebound. Glass fibers act as a thermal scaffold, cutting creep relaxation to just 39 MPa after 175 °C/16 h, so hot retorquing becomes unnecessary even in 316 L offshore systems. The NBR (nitrile) binder does more than bond; it fills flange surface imperfections, delivers oil/fuel resistance (≤5 % swell in Fuel B at 23 °C/5 h), and provides electrical insulation—volume resistivity 45 × 10¹² Ω·cm—that breaks galvanic corrosion paths. An optional 3XA anti‑stick coating further reduces flange galling and cuts maintenance time from 30 minutes of scraping to a 10‑minute swap.
For project engineers, the real‑world payoff is consistent: this gasket holds tight on steam, hydrocarbons, and seawater‐exposed connections without creep‑induced leakage. When you source from a reliable Chinese supplier, you gain the flexibility of custom dimensions, short lead times (7–30 days), and MOQ‑friendly pricing—at just USD 9.9/set including G10 insulating sleeve, washers, and ZPS metallic kit, it competes head‑to‑head with European brands. Many Asian and Middle‑East refineries already rely on this combination of aramid + glass + NBR because it eliminates cathodic protection concerns and extends flange life. The Klingersil C4430 Gasket is not merely a replacement part; it is a maintenance‑free sealing strategy for critical chemical, marine, and power plant applications, backed by validated stress‑relaxation data and field performance. Choose a certified Chinese supplier with batch traceability, and you get ISO‑quality at competitive cost—delivered worldwide within a month. This is why experienced maintenance teams now specify this material as their first‑line defense against hot, oily, and electrically aggressive environments.
FAQ
Q1: Can Klingersil C4430 Gasket be used for continuous steam service at 400 °C?
A1: Yes. The glass‑fibre scaffold and NBR binder maintain dimensional stability under sustained 400 °C steam. Independent tests show stress relaxation stays below 40 MPa after 16 h at 175 °C, and the aramid backbone prevents blowout even with thermal cycling. For Class 150 flanges, this means no hot retorquing during normal operating shifts.
Q1: Can Klingersil C4430 Gasket be used for continuous steam service at 400 °C?
A1: Yes. The glass‑fibre scaffold and NBR binder maintain dimensional stability under sustained 400 °C steam. Independent tests show stress relaxation stays below 40 MPa after 16 h at 175 °C, and the aramid backbone prevents blowout even with thermal cycling. For Class 150 flanges, this means no hot retorquing during normal operating shifts.
Q2: Does the G10 sleeve and ZPS kit come standard with every set from a Chinese supplier?
A2: Yes – when you order the complete set as specified (USD 9.9/set), the insulating G10 sleeve, matching washers, and the ZPS metallic compression kit are all included in the box. Reputable Chinese supplier listings clearly state “Complete Set” to avoid hidden add‑ons.
A2: Yes – when you order the complete set as specified (USD 9.9/set), the insulating G10 sleeve, matching washers, and the ZPS metallic compression kit are all included in the box. Reputable Chinese supplier listings clearly state “Complete Set” to avoid hidden add‑ons.
Q3: What is the real difference between Klingersil C4430 and generic aramid‑NBR gaskets?
A3: The difference lies in the controlled fibre ratio and the glass‑fibre thermal stabiliser. Generic copies often skip the glass scaffold or use lower‑grade aramid, which increases creep and reduces dielectric strength. The Klingersil C4430 Gasket offers verified rebound (55 %) and volume resistivity (45 × 10¹² Ω·cm) – values that generic products rarely certify.
A3: The difference lies in the controlled fibre ratio and the glass‑fibre thermal stabiliser. Generic copies often skip the glass scaffold or use lower‑grade aramid, which increases creep and reduces dielectric strength. The Klingersil C4430 Gasket offers verified rebound (55 %) and volume resistivity (45 × 10¹² Ω·cm) – values that generic products rarely certify.
Q4: How does the 3XA anti‑stick coating affect torque retention on Class 150 flanges?
A4: The coating reduces friction between gasket and flange faces, so torque loss from flange relaxation is minimised. In practice, coated gaskets hold 85‑90 % of initial bolt load after 24 h, whereas uncoated sheets often drop to 70‑75 %. It also makes disassembly much cleaner – no scraping, no flange gouging.
A4: The coating reduces friction between gasket and flange faces, so torque loss from flange relaxation is minimised. In practice, coated gaskets hold 85‑90 % of initial bolt load after 24 h, whereas uncoated sheets often drop to 70‑75 %. It also makes disassembly much cleaner – no scraping, no flange gouging.
Q5: Is this gasket electrically insulating enough to prevent galvanic corrosion in seawater piping?
A5: Absolutely. With volume resistivity of 45 × 10¹² Ω·cm, the Klingersil C4430 Gasket acts as an effective isolator between dissimilar metals (e.g., 316L and carbon steel). Combined with the G10 sleeve, it breaks the conductive path that drives galvanic current, which is why offshore operators favour it.
A5: Absolutely. With volume resistivity of 45 × 10¹² Ω·cm, the Klingersil C4430 Gasket acts as an effective isolator between dissimilar metals (e.g., 316L and carbon steel). Combined with the G10 sleeve, it breaks the conductive path that drives galvanic current, which is why offshore operators favour it.
Q6: What customisation options are available when ordering from a Chinese supplier?
A6: You can request non‑standard thicknesses, odd‑shaped cuts (e.g., oval or rectangular), special ID/OD dimensions, and batch‑level dye‑penetrant inspection reports. Most Chinese supplier factories also offer private labelling and tailored packaging for project‑specific needs.
A6: You can request non‑standard thicknesses, odd‑shaped cuts (e.g., oval or rectangular), special ID/OD dimensions, and batch‑level dye‑penetrant inspection reports. Most Chinese supplier factories also offer private labelling and tailored packaging for project‑specific needs.
Send Message
